snes-asm/legacy/test_gfx/test_gfx.asm

.include "header.inc"
.include "snes_init.asm"
.include "my_custom.asm"


.EQU PalNum $0000
.EQU VBlankCount $0010

.BANK 0 SLOT 0
.org 0
.section "Vblank"

VBlank:

    Set_A_8_XY_16

    lda VBlankCount
    ina
    sta VBlankCount

    lda $4210 ; clear NMI flag
    rti

.ENDS

.BANK 0 SLOT 0
.ORG 0
.section "Main"

.MACRO Video_Port_Control
    ;VRAM transfer, word-access, increment by 1
    lda #%10000000 
    sta $2115
.ENDM

;assumes 8-bit a, 16-bit xy
.MACRO Load_Block_to_VRAM ARGS SOURCE DEST SIZE
    Video_Port_Control

    ldx #DEST
    stx $2116 ; $2116/2117 is 2byte address for VRAM upload/download. most significant bit must be 0

    lda #:SOURCE ; source bank
    ldx #SOURCE ; source offset
    ldy #SIZE

    stx $4302 ; store data offset into DMA control register
    sta $4304 ; store bank into DMA source bank
    sty $4305 ; store size of block

    lda #$01
    sta $4300  ; set DMA mode (word, normal increment)

    lda #$18
    sta $4301 ; set destination register (VRAM write register) - add value to $2100 to get destination address
              ; i.e. this is writing to $2118, which when written writes a byte to VRAM

    lda #$01
    sta $420b ; and start the transfer
.ENDM

Start:
    Snes_Init

    Set_A_8_XY_16

    stz PalNum

    Load_Palette_Color $00, $00
    Load_Palette_Color $00, $0f
    Load_Palette_Color $00, $ff
    Load_Palette_Color $ff, $0a

    Set_Screen_Brightness %00001111

    lda #%00000000 ; 8x8 for all 4 backgrounds,  no priority flip, Mode: 4 colors/tile w/ 32 palettes
    sta $2105      ; store to screen mode register

    ; size (last argument) depends on color mode
    ; location is beginning of VRAM

    ; put character data at VRAM $0000, tile data at $0400
    lda #$04
    sta $2107 ; BG1 tile map location (upper 6 bits)
    lda #$00
    sta $210b ; BG1 character location ($1000 word intervals - can't go over $8000 b/c size of VRAM)

    stz $1337

    ; main screen designation
    lda #%00000001
    sta $212c ; enable bkg 1,

    Load_Block_to_VRAM Tiles, $0000, (8*2*3),

    Load_Block_to_VRAM TileMap, $0400, 32

    Enable_NMI_And_Joypad

mainloop:

    wai

    lda VBlankCount
    beq SetBack
    sbc #$80
    beq SetDifferent

    jmp mainloop

SetBack:
    Reset_Palette_Offset
    Load_Palette_Color $00, $00
    Load_Palette_Color $00, $0f
    Load_Palette_Color $00, $ff
    Load_Palette_Color $ff, $0a
    jmp mainloop

SetDifferent:
    Reset_Palette_Offset
    Load_Palette_Color $0f, $f0
    Load_Palette_Color $00, $0f
    Load_Palette_Color $0a, $00
    Load_Palette_Color $00, $00
    jmp mainloop


.ENDS


.BANK 1 SLOT 0
.org 0
.section "TileData"

Tiles:

;blank tile
    .db $00, $00, $00, $00, $00, $00, $00, $00
    .db $00, $00, $00, $00, $00, $00, $00, $00

;face
    .db %00000000
    .db %00000000

    .db %11000011
    .db %11000011

    .db %11000011
    .db %11000011

    .db %00111000
    .db %00111000

    .db %00111000
    .db %00111000

    .db %10000001
    .db %10000001

    .db %01000010
    .db %01000010

    .db %00111100
    .db %00111100

; different face
    .db %11111111
    .db %00000000

    .db %11111111
    .db %00000000

    .db %11000011
    .db %00000000

    .db %00111000
    .db %00111000

    .db %00111000
    .db %00111000

    .db %10000001
    .db %10000001

    .db %01000010
    .db %01000010

    .db %00111100
    .db %00111100


; each entry in the tile map is two bytes long
; here is the format:
;High        Low                 v: vertical flip    h: horizontal flip
;vhopppcc    cccccccc            o: priority bit     p: palette number
;                                c: Starting character (tile) number
TileMap:
    .db $02, $80, $02, $00
    .db $02, $80, $02, $00
    .db $02, $80, $02, $00
    .db $02, $80, $02, $00
    .db $02, $80, $02, $00
    .db $02, $80, $02, $00
    .db $02, $80, $02, $00
    .db $02, $80, $02, $00
TileMapEnd:
.ENDS