nix-bitcoin/examples/configuration.nix

# Edit this configuration file to define what should be installed on
# your system.  Help is available in the configuration.nix(5) man page
# and in the NixOS manual (accessible by running ‘nixos-help’).

{ config, pkgs, lib, ... }: {
  imports = [
    <nix-bitcoin/modules/presets/secure-node.nix>

    # FIXME: The hardened kernel profile improves security but
    # decreases performance by ~50%.
    # Turn it off when not needed.
    <nix-bitcoin/modules/presets/hardened.nix>
    #
    # You can enable the hardened-extended preset instead to further improve security
    # at the cost of functionality and performance.
    # See the comments at the top of `hardened-extended.nix` for further details.
    # <nix-bitcoin/modules/presets/hardened-extended.nix>

    # FIXME: Uncomment the next line to import your hardware configuration. If so,
    # add the hardware configuration file to the same directory as this file.
    #./hardware-configuration.nix
  ];
  # FIXME: Enable modules by uncommenting their respective line. Disable
  # modules by commenting out their respective line.

  ### BITCOIND
  # Bitcoind is enabled by default via secure-node.nix.
  #
  # Set this option to enable pruning with a specified MiB value.
  # clightning is compatible with pruning. See
  # https://github.com/ElementsProject/lightning/#pruning for more information.
  # LND and electrs are not compatible with pruning.
  # services.bitcoind.prune = 100000;
  #
  # Set this to accounce the onion service address to peers.
  # The onion service allows accepting incoming connections via Tor.
  # nix-bitcoin.onionServices.bitcoind.public = true;
  #
  # You can add options that are not defined in modules/bitcoind.nix as follows
  # services.bitcoind.extraConfig = ''
  #   maxorphantx=110
  # '';

  ### CLIGHTNING
  # Enable clightning, a Lightning Network implementation in C.
  services.clightning.enable = true;
  #
  # Set this to create an onion service by which clightning can accept incoming connections
  # via Tor.
  # The onion service is automatically announced to peers.
  # nix-bitcoin.onionServices.clightning.public = true;
  #
  # == Plugins
  # See ../docs/usage.md for the list of available plugins.
  # services.clightning.plugins.prometheus.enable = true;

  ### LND
  # Set this to enable lnd, a lightning implementation written in Go.
  # services.lnd.enable = true;
  #
  # NOTE: In order to avoid collisions with clightning you must disable clightning or
  # change the services.clightning.port or services.lnd.port to a port other than
  # 9735.
  #
  # Set this to create an onion service by which lnd can accept incoming connections
  # via Tor.
  # The onion service is automatically announced to peers.
  # nix-bitcoin.onionServices.lnd.public = true;
  #
  # Set this to create an lnd REST onion service.
  # Adds binary `lndconnect-rest-onion` to the system environment.
  # This binary generates QR codes or URIs for connecting applications to lnd via the
  # REST onion service.
  # services.lnd.restOnionService.enable = true;
  #
  ## WARNING
  # If you use lnd, you should manually backup your wallet mnemonic
  # seed. This will allow you to recover on-chain funds. You can run the
  # following commands after the lnd service starts:
  #   mkdir -p ./backups/lnd/
  #   scp bitcoin-node:/var/lib/lnd/lnd-seed-mnemonic ./backups/lnd/
  #
  # You should also backup your channel state after opening new channels.
  # This will allow you to recover off-chain funds, by force-closing channels.
  #   scp bitcoin-node:/var/lib/lnd/chain/bitcoin/mainnet/channel.backup ./backups/lnd/

  ### RIDE THE LIGHTNING
  # Set this to enable RTL, a web interface for lnd and clightning.
  # services.rtl.enable = true;
  #
  # Set this to add a clightning node interface.
  # Automatically enables clightning.
  # services.rtl.nodes.clightning = true;
  #
  # Set this to add a lnd node interface.
  # Automatically enables lnd.
  # services.rtl.nodes.lnd = true;
  #
  # You can enable both nodes simultaneously.
  #
  # Set this option to enable swaps with lightning-loop.
  # Automatically enables lightning-loop.
  # services.rtl.loop = true;

  ### SPARK WALLET
  # Set this to enable spark-wallet, a minimalistic wallet GUI for
  # c-lightning, accessible over the web or through mobile and desktop apps.
  # Automatically enables clightning.
  # services.spark-wallet.enable = true;

  ### ELECTRS
  # Set this to enable electrs, an efficient Electrum server implemented in Rust.
  # services.electrs.enable = true;

  ### BTCPayServer
  # Set this to enable BTCPayServer, a self-hosted, open-source
  # cryptocurrency payment processor.
  # services.btcpayserver.enable = true;
  #
  # Privacy Warning: BTCPayServer currently looks up price rates without
  # proxying them through Tor. This means an outside observer can correlate
  # your BTCPayServer usage, like invoice creation times, with your IP address.
  #
  # Enable this option to connect BTCPayServer to clightning.
  # services.btcpayserver.lightningBackend = "clightning";
  #
  # Enable this option to connect BTCPayServert to lnd.
  # services.btcpayserver.lightningBackend = "lnd";
  #
  # The lightning backend service is automatically enabled.
  # Afterwards you need to go into Store > General Settings > Lightning Nodes
  # and select "the internal lightning node of this BTCPay Server".
  #
  # Set this to create an onion service to make the btcpayserver web interface
  # accessible via Tor.
  # Security WARNING: Create a btcpayserver administrator account before allowing
  # public access to the web interface.
  # nix-bitcoin.onionServices.btcpayserver.enable = true;

  ### LIQUIDD
  # Enable this module to use Liquid, a sidechain for an inter-exchange
  # settlement network linking together cryptocurrency exchanges and
  # institutions around the world.
  # services.liquidd.enable = true;
  #
  # Liquid can be controlled with command 'elements-cli'.

  ### Hardware wallets
  # Enable the following to allow using hardware wallets.
  # See https://github.com/bitcoin-core/HWI for more information.
  #
  # Ledger must be initialized through the official ledger live app and the Bitcoin app must
  # be installed and running on the device.
  # services.hardware-wallets.ledger = true;
  #
  # Trezor can be initialized with the trezorctl command in nix-bitcoin. More information in
  # `docs/usage.md`.
  # services.hardware-wallets.trezor = true;

  ### lightning-loop
  # Set this to enable lightninglab's non-custodial off/on chain bridge.
  # services.lightning-loop.enable = true;
  #
  # loopd (lightning-loop daemon) will be started automatically. Users can
  # interact with off/on chain bridge using `loop in` and `loop out`.
  # Automatically enables lnd.

  ### lightning-pool
  # Set this to enable Lightning Lab's non-custodial batched uniform
  # clearing-price auction for Lightning Channel Leases.
  # services.lightning-pool.enable = true;
  #
  # Use the `pool` command to interact with the lightning-pool service.
  # Automatically enables lnd.
  #
  # lightning-pool requires that lnd has a publicly reachable address.
  # Set this to create a public onion service for lnd.
  # nix-bitcoin.onionServices.lnd.public = true;

  ### charge-lnd
  # Set this to enable charge-lnd, a simple policy based fee manager for
  # LND. With this tool you can set fees to autobalance, recover channel open
  # costs, use on-chain fees as reference, or just use static fees. You decide.
  # services.charge-lnd.enable = true;
  #
  # Define policies as outlined in the project documentation.
  # services.charge-lnd.policies = ''
  # '';

  ### JOINMARKET
  # Set this to enable the JoinMarket service, including its command-line scripts.
  # These scripts have prefix 'jm-', like 'jm-tumbler'.
  # Note: JoinMarket has full access to bitcoind, including its wallet functionality.
  # services.joinmarket.enable = true;
  #
  # Set this to enable the JoinMarket Yield Generator Bot. You will be able to
  # earn sats by providing CoinJoin liquidity. This makes it impossible to use other
  # scripts that access your wallet.
  # services.joinmarket.yieldgenerator.enable = true;
  #
  # Set this to enable the JoinMarket order book watcher.
  # services.joinmarket-ob-watcher.enable = true;

  ### Backups
  # Set this to enable nix-bitcoin's own backup service. By default, it
  # uses duplicity to incrementally back up all important files in /var/lib to
  # /var/lib/localBackups once a day.
  # services.backups.enable = true;
  #
  # You can pull the localBackups folder with
  # `scp -r bitcoin-node:/var/lib/localBackups /my-backup-path/`
  # Alternatively, you can also set a remote target url, for example
  # services.backups.destination = "sftp://user@host[:port]/[relative|/absolute]_path";
  # Supply the sftp password by appending the FTP_PASSWORD environment variable
  # to secrets/backup-encryption-env like so
  # `echo "FTP_PASSWORD=<password>" >> secrets/backup-encryption-env`
  # You many also need to set a ssh host and publickey with
  # programs.ssh.knownHosts."host" = {
  #   hostNames = [ "host" ];
  #   publicKey = "<ssh public from `ssh-keyscan`>";
  # };
  # If you also want to backup bulk data like the Bitcoin & Liquid blockchains
  # and electrs data directory, enable
  # services.backups.with-bulk-data = true;

  ### netns-isolation (EXPERIMENTAL)
  # Enable this module to use Network Namespace Isolation. This feature places
  # every service in its own network namespace and only allows truly necessary
  # connections between network namespaces, making sure services are isolated on
  # a network-level as much as possible.
  # nix-bitcoin.netns-isolation.enable = true;

  # FIXME: Define your hostname.
  networking.hostName = "host";
  time.timeZone = "UTC";

  # FIXME: Add your SSH pubkey
  services.openssh.enable = true;
  users.users.root = {
    openssh.authorizedKeys.keys = [ "" ];
  };

  # FIXME: Uncomment this to allow the operator user to run
  # commands as root with `sudo` or `doas`
  # users.users.operator.extraGroups = [ "wheel" ];

  # FIXME: add packages you need in your system
  environment.systemPackages = with pkgs; [
    vim
  ];

  # FIXME: Add custom options (like boot options, output of
  # nixos-generate-config, etc.):

  # This value determines the NixOS release with which your system is to be
  # compatible, in order to avoid breaking some software such as database
  # servers. You should change this only after NixOS release notes say you
  # should.
  system.stateVersion = "21.05"; # Did you read the comment?

  # The nix-bitcoin release version that your config is compatible with.
  # When upgrading to a backwards-incompatible release, nix-bitcoin will display an
  # an error and provide hints for migrating your config to the new release.
  nix-bitcoin.configVersion = "0.0.57";
}