dmrconfig/uv380.c

2627 lines
72 KiB
C

/*
* Interface to TYT MD-UV380 and MD-2017.
*
* Copyright (C) 2018 Serge Vakulenko, KK6ABQ
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <sys/stat.h>
#include "radio.h"
#include "util.h"
//#define PRINT_EXTENDED_PARAMS
#define NCHAN 3000
#define NCONTACTS 10000
#define NZONES 250
#define NGLISTS 250
#define NSCANL 250
#define NMESSAGES 50
#define MEMSZ 0xd0000
#define OFFSET_TIMESTMP 0x02001
#define OFFSET_SETTINGS 0x02040
#define OFFSET_MSG 0x02180
#define OFFSET_GLISTS 0x0ec20
#define OFFSET_ZONES 0x149e0
#define OFFSET_SCANL 0x18860
#define OFFSET_ZONEXT 0x31000
#define OFFSET_CHANNELS 0x40000
#define OFFSET_CONTACTS 0x70000
#define CALLSIGN_START 0x00200000 // Start of callsign database
#define CALLSIGN_FINISH 0x01000000 // End of callsign database
#define CALLSIGN_OFFSET 0x4003
#define GET_TIMESTAMP() (&radio_mem[OFFSET_TIMESTMP])
#define GET_SETTINGS() ((general_settings_t*) &radio_mem[OFFSET_SETTINGS])
#define GET_CHANNEL(i) ((channel_t*) &radio_mem[OFFSET_CHANNELS + (i)*64])
#define GET_ZONE(i) ((zone_t*) &radio_mem[OFFSET_ZONES + (i)*64])
#define GET_ZONEXT(i) ((zone_ext_t*) &radio_mem[OFFSET_ZONEXT + (i)*224])
#define GET_SCANLIST(i) ((scanlist_t*) &radio_mem[OFFSET_SCANL + (i)*104])
#define GET_CONTACT(i) ((contact_t*) &radio_mem[OFFSET_CONTACTS + (i)*36])
#define GET_GROUPLIST(i) ((grouplist_t*) &radio_mem[OFFSET_GLISTS + (i)*96])
#define GET_MESSAGE(i) ((uint16_t*) &radio_mem[OFFSET_MSG + (i)*288])
#define GET_CALLSIGN(m,i) ((callsign_t*) ((m) + CALLSIGN_OFFSET + (i)*120))
#define VALID_TEXT(txt) (*(txt) != 0 && *(txt) != 0xffff)
#define VALID_CHANNEL(ch) VALID_TEXT((ch)->name)
#define VALID_ZONE(z) VALID_TEXT((z)->name)
#define VALID_SCANLIST(sl) VALID_TEXT((sl)->name)
#define VALID_GROUPLIST(gl) VALID_TEXT((gl)->name)
#define VALID_CONTACT(ct) ((ct)->type != 0 && VALID_TEXT((ct)->name))
//
// Channel data.
//
typedef struct {
// Byte 0
uint8_t channel_mode : 2, // Mode: Analog or Digital
#define MODE_ANALOG 1
#define MODE_DIGITAL 2
bandwidth : 2, // Bandwidth: 12.5 or 20 or 25 kHz
#define BW_12_5_KHZ 0
#define BW_20_KHZ 1
#define BW_25_KHZ 2
autoscan : 1, // Autoscan Enable
_unused1 : 2, // 0b11
lone_worker : 1; // Lone Worker
// Byte 1
uint8_t _unused2 : 1, // 0
rx_only : 1, // RX Only Enable
repeater_slot : 2, // Repeater Slot: 1 or 2
colorcode : 4; // Color Code: 0...15
// Byte 2
uint8_t privacy_no : 4, // Privacy No. (+1): 1...16
privacy : 2, // Privacy: None, Basic or Enhanced
#define PRIV_NONE 0
#define PRIV_BASIC 1
#define PRIV_ENHANCED 2
private_call_conf : 1, // Private Call Confirmed
data_call_conf : 1; // Data Call Confirmed
// Byte 3
uint8_t rx_ref_frequency : 2, // RX Ref Frequency: Low, Medium or High
#define REF_LOW 0
#define REF_MEDIUM 1
#define REF_HIGH 2
_unused3 : 1, // 0
emergency_alarm_ack : 1, // Emergency Alarm Ack
_unused4 : 3, // 0b110
display_pttid_dis : 1; // Display PTT ID (inverted)
// Byte 4
uint8_t tx_ref_frequency : 2, // RX Ref Frequency: Low, Medium or High
_unused5 : 2, // 0b01
vox : 1, // VOX Enable
_unused6 : 1, // 1
admit_criteria : 2; // Admit Criteria: Always, Channel Free or Correct CTS/DCS
#define ADMIT_ALWAYS 0
#define ADMIT_CH_FREE 1
#define ADMIT_TONE 2
#define ADMIT_COLOR 3
// Byte 5
uint8_t _unused7 : 4, // 0
in_call_criteria : 2, // In Call Criteria: Always, Follow Admit Criteria or TX Interrupt
#define INCALL_ALWAYS 0
#define INCALL_ADMIT 1
#define INCALL_TXINT 2
turn_off_freq : 2; // Non-QT/DQT Turn-off Freq.: None, 259.2Hz or 55.2Hz
#define TURNOFF_NONE 3
#define TURNOFF_259_2HZ 0
#define TURNOFF_55_2HZ 1
// Bytes 6-7
uint16_t contact_name_index; // Contact Name: Contact1...
// Bytes 8-9
uint8_t tot : 6, // TOT x 15sec: 0-Infinite, 1=15s... 37=555s
_unused13 : 2; // 0
uint8_t tot_rekey_delay; // TOT Rekey Delay: 0s...255s
// Bytes 10-11
uint8_t emergency_system_index; // Emergency System: None, System1...32
uint8_t scan_list_index; // Scan List: None, ScanList1...250
// Bytes 12-13
uint8_t group_list_index; // Group List: None, GroupList1...250
uint8_t _unused8; // 0
// Bytes 14-15
uint8_t _unused9; // 0
uint8_t squelch; // Squelch: 0...9
// Bytes 16-23
uint32_t rx_frequency; // RX Frequency: 8 digits BCD
uint32_t tx_frequency; // TX Frequency: 8 digits BCD
// Bytes 24-27
uint16_t ctcss_dcs_receive; // CTCSS/DCS Dec: 4 digits BCD
uint16_t ctcss_dcs_transmit; // CTCSS/DCS Enc: 4 digits BCD
// Bytes 28-29
uint8_t rx_signaling_syst; // Rx Signaling System: Off, DTMF-1...4
uint8_t tx_signaling_syst; // Tx Signaling System: Off, DTMF-1...4
// Byte 30
uint8_t power : 2, // Power: Low, Middle, High
#define POWER_HIGH 3
#define POWER_LOW 0
#define POWER_MIDDLE 2
_unused10 : 6; // 0b111111
// Byte 31
uint8_t _unused11 : 3, // 0b111
dcdm_switch_dis : 1, // DCDM switch (inverted)
leader_ms : 1, // Leader/MS: Leader or MS
#define DCDM_LEADER 0
#define DCDM_MS 1
_unused12 : 3; // 0b111
// Bytes 32-63
uint16_t name[16]; // Channel Name (Unicode)
} channel_t;
//
// Contact data.
//
typedef struct {
// Bytes 0-2
uint8_t id[3]; // Call ID: 1...16777215
#define CONTACT_ID(ct) ((ct)->id[0] | ((ct)->id[1] << 8) | ((ct)->id[2] << 16))
// Byte 3
uint8_t type : 5, // Call Type: Group Call, Private Call or All Call
#define CALL_GROUP 1
#define CALL_PRIVATE 2
#define CALL_ALL 3
receive_tone : 1, // Call Receive Tone: No or yes
_unused2 : 2; // 0b11
// Bytes 4-35
uint16_t name[16]; // Contact Name (Unicode)
} contact_t;
//
// Zone data.
//
typedef struct {
// Bytes 0-31
uint16_t name[16]; // Zone Name (Unicode)
// Bytes 32-63
uint16_t member_a[16]; // Member A: channels 1...16
} zone_t;
typedef struct {
// Bytes 0-95
uint16_t ext_a[48]; // Member A: channels 17...64
// Bytes 96-223
uint16_t member_b[64]; // Member B: channels 1...64
} zone_ext_t;
//
// Group list data.
//
typedef struct {
// Bytes 0-31
uint16_t name[16]; // Group List Name (Unicode)
// Bytes 32-95
uint16_t member[32]; // Contacts
} grouplist_t;
//
// Scan list data.
//
typedef struct {
// Bytes 0-31
uint16_t name[16]; // Scan List Name (Unicode)
// Bytes 32-37
uint16_t priority_ch1; // Priority Channel 1 or ffff
uint16_t priority_ch2; // Priority Channel 2 or ffff
uint16_t tx_designated_ch; // Tx Designated Channel or ffff
// Bytes 38-41
uint8_t _unused1; // 0xf1
uint8_t sign_hold_time; // Signaling Hold Time (x25 = msec)
uint8_t prio_sample_time; // Priority Sample Time (x250 = msec)
uint8_t _unused2; // 0xff
// Bytes 42-103
uint16_t member[31]; // Channels
} scanlist_t;
//
// General settings.
// TODO: verify the general settings with official CPS
//
typedef struct {
// Bytes 0-19
uint16_t intro_line1[10];
// Bytes 20-39
uint16_t intro_line2[10];
// Bytes 40-63
uint8_t _unused40[24];
// Byte 64
uint8_t _unused64_0 : 3,
monitor_type : 1,
_unused64_4 : 1,
disable_all_leds : 1,
_unused64_6 : 2;
// Byte 65
uint8_t talk_permit_tone : 2,
pw_and_lock_enable : 1,
ch_free_indication_tone : 1,
_unused65_4 : 1,
disable_all_tones : 1,
save_mode_receive : 1,
save_preamble : 1;
// Byte 66
uint8_t _unused66_0 : 2,
keypad_tones : 1,
intro_picture : 1,
_unused66_4 : 4;
// Byte 67
uint8_t _unused67;
// Bytes 68-71
uint8_t radio_id[3];
uint8_t _unused71;
// Bytes 72-84
uint8_t tx_preamble_duration;
uint8_t group_call_hang_time;
uint8_t private_call_hang_time;
uint8_t vox_sensitivity;
uint8_t _unused76[2];
uint8_t rx_low_battery_interval;
uint8_t call_alert_tone_duration;
uint8_t lone_worker_response_time;
uint8_t lone_worker_reminder_time;
uint8_t _unused82;
uint8_t scan_digital_hang_time;
uint8_t scan_analog_hang_time;
// Byte 85
uint8_t _unused85_0 : 6,
backlight_time : 2;
// Bytes 86-87
uint8_t set_keypad_lock_time;
uint8_t mode;
// Bytes 88-95
uint32_t power_on_password;
uint32_t radio_prog_password;
// Bytes 96-103
uint8_t pc_prog_password[8];
// Bytes 104-111
uint8_t _unused104[8];
// Bytes 112-143
uint16_t radio_name[16];
} general_settings_t;
//
// Callsign database (CSV).
//
typedef struct {
unsigned dmrid : 24; // DMR id
unsigned _unused : 8; // 0xff
char callsign[16]; // ascii zero terminated
char name[100]; // name, nickname, city, state, country
} callsign_t;
static const char *POWER_NAME[] = { "Low", "Low", "Mid", "High" };
static const char *BANDWIDTH[] = { "12.5", "20", "25", "25" };
static const char *CONTACT_TYPE[] = { "-", "Group", "Private", "All" };
static const char *ADMIT_NAME[] = { "-", "Free", "Tone", "Color" };
#ifdef PRINT_EXTENDED_PARAMS
static const char *INCALL_NAME[] = { "-", "Admit", "TXInt", "Admit" };
static const char *REF_FREQUENCY[] = { "Low", "Med", "High" };
static const char *PRIVACY_NAME[] = { "-", "Basic", "Enhanced" };
static const char *SIGNALING_SYSTEM[] = { "-", "DTMF-1", "DTMF-2", "DTMF-3", "DTMF-4" };
static const char *TURNOFF_FREQ[] = { "259.2", "55.2", "-", "-" };
#endif
//
// Print a generic information about the device.
//
static void uv380_print_version(radio_device_t *radio, FILE *out)
{
unsigned char *timestamp = GET_TIMESTAMP();
static const char charmap[16] = "0123456789:;<=>?";
if (*timestamp != 0xff) {
fprintf(out, "Last Programmed Date: %d%d%d%d-%d%d-%d%d",
timestamp[0] >> 4, timestamp[0] & 15, timestamp[1] >> 4, timestamp[1] & 15,
timestamp[2] >> 4, timestamp[2] & 15, timestamp[3] >> 4, timestamp[3] & 15);
fprintf(out, " %d%d:%d%d:%d%d\n",
timestamp[4] >> 4, timestamp[4] & 15, timestamp[5] >> 4, timestamp[5] & 15,
timestamp[6] >> 4, timestamp[6] & 15);
fprintf(out, "CPS Software Version: V%c%c.%c%c\n",
charmap[timestamp[7] & 15], charmap[timestamp[8] & 15],
charmap[timestamp[9] & 15], charmap[timestamp[10] & 15]);
}
}
//
// Read memory image from the device.
//
static void uv380_download(radio_device_t *radio)
{
int bno;
for (bno=0; bno<MEMSZ/1024; bno++) {
dfu_read_block(bno, &radio_mem[bno*1024], 1024);
++radio_progress;
if (radio_progress % 32 == 0) {
fprintf(stderr, "#");
fflush(stderr);
}
}
}
//
// Write memory image to the device.
//
static void uv380_upload(radio_device_t *radio, int cont_flag)
{
int bno;
dfu_erase(0, MEMSZ);
for (bno=0; bno<MEMSZ/1024; bno++) {
dfu_write_block(bno, &radio_mem[bno*1024], 1024);
++radio_progress;
if (radio_progress % 32 == 0) {
fprintf(stderr, "#");
fflush(stderr);
}
}
}
//
// Check whether the memory image is compatible with this device.
//
static int uv380_is_compatible(radio_device_t *radio)
{
return 1;
}
//
// Set name for a given zone.
//
static void setup_zone(int index, const char *name)
{
zone_t *z = GET_ZONE(index);
utf8_decode(z->name, name, 16);
}
//
// Add channel to a zone.
// Return 0 on failure.
//
static int zone_append(int index, int b_flag, int cnum)
{
zone_t *z = GET_ZONE(index);
zone_ext_t *zext = GET_ZONEXT(index);
int i;
if (b_flag) {
for (i=0; i<64; i++) {
if (zext->member_b[i] == cnum)
return 1;
if (zext->member_b[i] == 0) {
zext->member_b[i] = cnum;
return 1;
}
}
} else {
for (i=0; i<16; i++) {
if (z->member_a[i] == cnum)
return 1;
if (z->member_a[i] == 0) {
z->member_a[i] = cnum;
return 1;
}
}
for (i=0; i<48; i++) {
if (zext->ext_a[i] == cnum)
return 1;
if (zext->ext_a[i] == 0) {
zext->ext_a[i] = cnum;
return 1;
}
}
}
return 0;
}
static void erase_zone(int index)
{
zone_t *z = GET_ZONE(index);
zone_ext_t *zext = GET_ZONEXT(index);
memset(z, 0, 64);
memset(zext, 0, 224);
}
//
// Set parameters for a given scan list.
//
static void setup_scanlist(int index, const char *name,
int prio1, int prio2, int txchan)
{
scanlist_t *sl = GET_SCANLIST(index);
// Bytes 0-31
utf8_decode(sl->name, name, 16);
// Bytes 32-37
sl->priority_ch1 = prio1;
sl->priority_ch2 = prio2;
sl->tx_designated_ch = txchan;
}
static void erase_scanlist(int index)
{
scanlist_t *sl = GET_SCANLIST(index);
memset(sl, 0, 104);
// Bytes 32-37
sl->priority_ch1 = 0xffff;
sl->priority_ch2 = 0xffff;
sl->tx_designated_ch = 0xffff;
// Bytes 38-41
sl->_unused1 = 0xf1;
sl->sign_hold_time = 500 / 25; // 500 msec
sl->prio_sample_time = 2000 / 250; // 2 sec
sl->_unused2 = 0xff;
}
//
// Add channel to a zone.
// Return 0 on failure.
//
static int scanlist_append(int index, int cnum)
{
scanlist_t *sl = GET_SCANLIST(index);
int i;
for (i=0; i<31; i++) {
if (sl->member[i] == cnum)
return 1;
if (sl->member[i] == 0) {
sl->member[i] = cnum;
return 1;
}
}
return 0;
}
static void erase_contact(int index)
{
contact_t *ct = GET_CONTACT(index);
memset(ct, 0, 36);
*(uint32_t*)ct = 0xffffffff;
}
static void setup_contact(int index, const char *name, int type, int id, int rxtone)
{
contact_t *ct = GET_CONTACT(index);
ct->id[0] = id;
ct->id[1] = id >> 8;
ct->id[2] = id >> 16;
ct->type = type;
ct->receive_tone = rxtone;
utf8_decode(ct->name, name, 16);
}
static void setup_grouplist(int index, const char *name)
{
grouplist_t *gl = GET_GROUPLIST(index);
utf8_decode(gl->name, name, 16);
}
//
// Add contact to a grouplist.
// Return 0 on failure.
//
static int grouplist_append(int index, int cnum)
{
grouplist_t *gl = GET_GROUPLIST(index);
int i;
for (i=0; i<32; i++) {
if (gl->member[i] == cnum)
return 1;
if (gl->member[i] == 0) {
gl->member[i] = cnum;
return 1;
}
}
return 0;
}
//
// Set text for a given message.
//
static void setup_message(int index, const char *text)
{
uint16_t *msg = GET_MESSAGE(index);
// Skip spaces and tabs.
while (*text == ' ' || *text == '\t')
text++;
utf8_decode(msg, text, 144);
}
//
// Check that the radio does support this frequency.
//
static int is_valid_frequency(int mhz)
{
if (mhz >= 136 && mhz <= 174)
return 1;
if (mhz >= 400 && mhz <= 480)
return 1;
return 0;
}
//
// Set the parameters for a given memory channel.
//
static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_mhz,
int power, int scanlist, int squelch, int tot, int rxonly,
int admit, int colorcode, int timeslot, int grouplist, int contact,
int rxtone, int txtone, int width)
{
channel_t *ch = GET_CHANNEL(i);
ch->channel_mode = mode;
ch->bandwidth = width;
ch->rx_only = rxonly;
ch->repeater_slot = timeslot;
ch->colorcode = colorcode;
ch->admit_criteria = admit;
ch->contact_name_index = contact;
ch->tot = tot;
ch->scan_list_index = scanlist;
ch->group_list_index = grouplist;
ch->squelch = squelch;
ch->rx_frequency = mhz_to_abcdefgh(rx_mhz);
ch->tx_frequency = mhz_to_abcdefgh(tx_mhz);
ch->ctcss_dcs_receive = rxtone;
ch->ctcss_dcs_transmit = txtone;
ch->power = power;
utf8_decode(ch->name, name, 16);
}
//
// Erase the channel record.
//
static void erase_channel(int i)
{
channel_t *ch = GET_CHANNEL(i);
// Byte 0
ch->channel_mode = MODE_ANALOG;
ch->bandwidth = BW_12_5_KHZ;
ch->autoscan = 0;
ch->_unused1 = 3;
ch->lone_worker = 0;
// Byte 1
ch->_unused2 = 0;
ch->rx_only = 0;
ch->repeater_slot = 1;
ch->colorcode = 1;
// Byte 2
ch->privacy_no = 0;
ch->privacy = PRIV_NONE;
ch->private_call_conf = 0;
ch->data_call_conf = 0;
// Byte 3
ch->rx_ref_frequency = REF_LOW;
ch->_unused3 = 0;
ch->emergency_alarm_ack = 0;
ch->_unused4 = 6;
ch->display_pttid_dis = 1;
// Byte 4
ch->tx_ref_frequency = REF_LOW;
ch->_unused5 = 1;
ch->vox = 0;
ch->_unused6 = 1;
ch->admit_criteria = ADMIT_ALWAYS;
// Byte 5
ch->_unused7 = 0;
ch->in_call_criteria = INCALL_ALWAYS;
ch->turn_off_freq = TURNOFF_NONE;
// Bytes 6-7
ch->contact_name_index = 0;
// Bytes 8-9
ch->tot = 60/15;
ch->_unused13 = 0;
ch->tot_rekey_delay = 0;
// Bytes 10-11
ch->emergency_system_index = 0;
ch->scan_list_index = 0;
// Bytes 12-13
ch->group_list_index = 0;
ch->_unused8 = 0;
// Bytes 14-15
ch->_unused9 = 0;
ch->squelch = 1;
// Bytes 16-23
ch->rx_frequency = 0x40000000;
ch->tx_frequency = 0x40000000;
// Bytes 24-27
ch->ctcss_dcs_receive = 0xffff;
ch->ctcss_dcs_transmit = 0xffff;
// Bytes 28-29
ch->rx_signaling_syst = 0;
ch->tx_signaling_syst = 0;
// Byte 30
ch->power = POWER_HIGH;
ch->_unused10 = 0x3f;
// Byte 31
ch->_unused11 = 7;
ch->dcdm_switch_dis = 1;
ch->leader_ms = DCDM_MS;
ch->_unused12 = 7;
// Bytes 32-63
utf8_decode(ch->name, "", 16);
}
static void print_chanlist(FILE *out, uint16_t *unsorted, int nchan)
{
int last = -1;
int range = 0;
int n;
uint16_t data[nchan];
// Sort the list before printing.
memcpy(data, unsorted, nchan * sizeof(uint16_t));
qsort(data, nchan, sizeof(uint16_t), compare_index);
for (n=0; n<nchan; n++) {
int cnum = data[n];
if (cnum == 0)
break;
if (cnum == last+1) {
range = 1;
} else {
if (range) {
fprintf(out, "-%d", last);
range = 0;
}
if (n > 0)
fprintf(out, ",");
fprintf(out, "%d", cnum);
}
last = cnum;
}
if (range)
fprintf(out, "-%d", last);
}
static void print_id(FILE *out, int verbose)
{
general_settings_t *gs = GET_SETTINGS();
unsigned id = gs->radio_id[0] | (gs->radio_id[1] << 8) | (gs->radio_id[2] << 16);
if (verbose)
fprintf(out, "\n# Unique DMR ID and name of this radio.");
fprintf(out, "\nID: %u\nName: ", id);
if (VALID_TEXT(gs->radio_name)) {
print_unicode(out, gs->radio_name, 16, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
static void print_intro(FILE *out, int verbose)
{
general_settings_t *gs = GET_SETTINGS();
if (verbose)
fprintf(out, "\n# Text displayed when the radio powers up.\n");
fprintf(out, "Intro Line 1: ");
if (VALID_TEXT(gs->intro_line1)) {
print_unicode(out, gs->intro_line1, 10, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\nIntro Line 2: ");
if (VALID_TEXT(gs->intro_line2)) {
print_unicode(out, gs->intro_line2, 10, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
//
// Do we have any channels of given mode?
//
static int have_channels(int mode)
{
int i;
for (i=0; i<NCHAN; i++) {
channel_t *ch = GET_CHANNEL(i);
if (VALID_CHANNEL(ch) && ch->channel_mode == mode)
return 1;
}
return 0;
}
//
// Print base parameters of the channel:
// Name
// RX Frequency
// TX Frequency
// Power
// Scan List
// TOT
// RX Only
// Admit Criteria
//
static void print_chan_base(FILE *out, channel_t *ch, int cnum)
{
fprintf(out, "%5d ", cnum);
print_unicode(out, ch->name, 16, 1);
fprintf(out, " ");
print_freq(out, ch->rx_frequency);
fprintf(out, " ");
print_offset(out, ch->rx_frequency, ch->tx_frequency);
fprintf(out, "%-4s ", POWER_NAME[ch->power]);
if (ch->scan_list_index == 0)
fprintf(out, "- ");
else
fprintf(out, "%-4d ", ch->scan_list_index);
if (ch->tot == 0)
fprintf(out, "- ");
else
fprintf(out, "%-3d ", ch->tot * 15);
fprintf(out, "%c ", "-+"[ch->rx_only]);
fprintf(out, "%-6s ", ADMIT_NAME[ch->admit_criteria]);
}
#ifdef PRINT_EXTENDED_PARAMS
//
// Print extended parameters of the channel:
// TOT Rekey Delay
// RX Ref Frequency
// RX Ref Frequency
// Lone Worker
// VOX
//
static void print_chan_ext(FILE *out, channel_t *ch)
{
fprintf(out, "%-3d ", ch->tot_rekey_delay);
fprintf(out, "%-5s ", REF_FREQUENCY[ch->rx_ref_frequency]);
fprintf(out, "%-5s ", REF_FREQUENCY[ch->tx_ref_frequency]);
fprintf(out, "%c ", "-+"[ch->lone_worker]);
fprintf(out, "%c ", "-+"[ch->vox]);
}
#endif
static void print_digital_channels(FILE *out, int verbose)
{
int i;
if (verbose) {
fprintf(out, "# Table of digital channels.\n");
fprintf(out, "# 1) Channel number: 1-%d\n", NCHAN);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Receive frequency in MHz\n");
fprintf(out, "# 4) Transmit frequency or +/- offset in MHz\n");
fprintf(out, "# 5) Transmit power: High, Mid, Low\n");
fprintf(out, "# 6) Scan list: - or index in Scanlist table\n");
fprintf(out, "# 7) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
fprintf(out, "# 8) Receive only: -, +\n");
fprintf(out, "# 9) Admit criteria: -, Free, Color\n");
fprintf(out, "# 10) Color code: 0, 1, 2, 3... 15\n");
fprintf(out, "# 11) Time slot: 1 or 2\n");
fprintf(out, "# 12) Receive group list: - or index in Grouplist table\n");
fprintf(out, "# 13) Contact for transmit: - or index in Contacts table\n");
fprintf(out, "#\n");
}
fprintf(out, "Digital Name Receive Transmit Power Scan TOT RO Admit Color Slot RxGL TxContact");
#ifdef PRINT_EXTENDED_PARAMS
fprintf(out, "AS InCall Sq Dly RxRef TxRef LW VOX EmSys Privacy PN PCC EAA DCC DCDM");
#endif
fprintf(out, "\n");
for (i=0; i<NCHAN; i++) {
channel_t *ch = GET_CHANNEL(i);
if (!VALID_CHANNEL(ch) || ch->channel_mode != MODE_DIGITAL) {
// Select digital channels
continue;
}
print_chan_base(out, ch, i+1);
// Print digital parameters of the channel:
// Color Code
// Repeater Slot
// Group List
// Contact Name
fprintf(out, "%-5d %-3d ", ch->colorcode, ch->repeater_slot);
if (ch->group_list_index == 0)
fprintf(out, "- ");
else
fprintf(out, "%-4d ", ch->group_list_index);
if (ch->contact_name_index == 0)
fprintf(out, "-");
else
fprintf(out, "%-5d", ch->contact_name_index);
#ifdef PRINT_EXTENDED_PARAMS
print_chan_ext(out, ch);
// Extended digital parameters of the channel:
// Autoscan
// In Call Criteria
// Squelch
// Emergency System
// Privacy
// Privacy No. (+1)
// Private Call Confirmed
// Emergency Alarm Ack
// Data Call Confirmed
// DCDM switch (inverted)
// Leader/MS
fprintf(out, "%c ", "-+"[ch->autoscan]);
fprintf(out, "%-6s ", INCALL_NAME[ch->in_call_criteria]);
if (ch->squelch <= 9)
fprintf(out, "%1d ", ch->squelch);
else
fprintf(out, "1 ");
if (ch->emergency_system_index == 0)
fprintf(out, "- ");
else
fprintf(out, "%-5d ", ch->emergency_system_index);
fprintf(out, "%-8s ", PRIVACY_NAME[ch->privacy]);
if (ch->privacy == PRIV_NONE)
fprintf(out, "- ");
else
fprintf(out, "%-2d ", ch->privacy_no + 1);
fprintf(out, "%c ", "-+"[ch->private_call_conf]);
fprintf(out, "%c ", "-+"[ch->emergency_alarm_ack]);
fprintf(out, "%c ", "-+"[ch->data_call_conf]);
if (ch->dcdm_switch_dis)
fprintf(out, "- ");
else
fprintf(out, "%-6s", ch->leader_ms ? "MS" : "Leader");
#endif
// Print contact name as a comment.
if (ch->contact_name_index > 0) {
contact_t *ct = GET_CONTACT(ch->contact_name_index - 1);
if (VALID_CONTACT(ct)) {
fprintf(out, " # ");
print_unicode(out, ct->name, 16, 0);
}
}
fprintf(out, "\n");
}
}
static void print_analog_channels(FILE *out, int verbose)
{
int i;
if (verbose) {
fprintf(out, "# Table of analog channels.\n");
fprintf(out, "# 1) Channel number: 1-%d\n", NCHAN);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Receive frequency in MHz\n");
fprintf(out, "# 4) Transmit frequency or +/- offset in MHz\n");
fprintf(out, "# 5) Transmit power: High, Mid, Low\n");
fprintf(out, "# 6) Scan list: - or index\n");
fprintf(out, "# 7) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
fprintf(out, "# 8) Receive only: -, +\n");
fprintf(out, "# 9) Admit criteria: -, Free, Tone\n");
fprintf(out, "# 10) Squelch level: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9\n");
fprintf(out, "# 11) Guard tone for receive, or '-' to disable\n");
fprintf(out, "# 12) Guard tone for transmit, or '-' to disable\n");
fprintf(out, "# 13) Bandwidth in kHz: 12.5, 20, 25\n");
fprintf(out, "#\n");
}
fprintf(out, "Analog Name Receive Transmit Power Scan TOT RO Admit Sq RxTone TxTone Width");
#ifdef PRINT_EXTENDED_PARAMS
fprintf(out, " AS Dly RxRef TxRef LW VOX RxSign TxSign ID TOFreq");
#endif
fprintf(out, "\n");
for (i=0; i<NCHAN; i++) {
channel_t *ch = GET_CHANNEL(i);
if (!VALID_CHANNEL(ch) || ch->channel_mode != MODE_ANALOG) {
// Select analog channels
continue;
}
print_chan_base(out, ch, i+1);
// Print analog parameters of the channel:
// Squelch
// CTCSS/DCS Dec
// CTCSS/DCS Enc
// Bandwidth
if (ch->squelch <= 9)
fprintf(out, "%1d ", ch->squelch);
else
fprintf(out, "1 ");
print_tone(out, ch->ctcss_dcs_receive);
fprintf(out, " ");
print_tone(out, ch->ctcss_dcs_transmit);
fprintf(out, " %s", BANDWIDTH[ch->bandwidth]);
#ifdef PRINT_EXTENDED_PARAMS
print_chan_ext(out, ch);
// Extended analog parameters of the channel:
// Rx Signaling System
// Tx Signaling System
// Display PTT ID (inverted)
// Non-QT/DQT Turn-off Freq.
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->rx_signaling_syst]);
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->tx_signaling_syst]);
fprintf(out, "%c ", "+-"[ch->display_pttid_dis]);
fprintf(out, "%s", TURNOFF_FREQ[ch->turn_off_freq]);
#endif
fprintf(out, "\n");
}
}
static int have_zones()
{
int i;
for (i=0; i<NZONES; i++) {
zone_t *z = GET_ZONE(i);
if (VALID_ZONE(z))
return 1;
}
return 0;
}
static int have_scanlists()
{
int i;
for (i=0; i<NSCANL; i++) {
scanlist_t *sl = GET_SCANLIST(i);
if (VALID_SCANLIST(sl))
return 1;
}
return 0;
}
static int have_contacts()
{
int i;
for (i=0; i<NCONTACTS; i++) {
contact_t *ct = GET_CONTACT(i);
if (VALID_CONTACT(ct))
return 1;
}
return 0;
}
static int have_grouplists()
{
int i;
for (i=0; i<NGLISTS; i++) {
grouplist_t *gl = GET_GROUPLIST(i);
if (VALID_GROUPLIST(gl))
return 1;
}
return 0;
}
static int have_messages()
{
int i;
for (i=0; i<NMESSAGES; i++) {
uint16_t *msg = GET_MESSAGE(i);
if (VALID_TEXT(msg))
return 1;
}
return 0;
}
//
// Print full information about the device configuration.
//
static void uv380_print_config(radio_device_t *radio, FILE *out, int verbose)
{
int i;
fprintf(out, "Radio: %s\n", radio->name);
if (verbose)
uv380_print_version(radio, out);
//
// Channels.
//
if (have_channels(MODE_DIGITAL)) {
fprintf(out, "\n");
print_digital_channels(out, verbose);
}
if (have_channels(MODE_ANALOG)) {
fprintf(out, "\n");
print_analog_channels(out, verbose);
}
//
// Zones.
//
if (have_zones()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of channel zones.\n");
fprintf(out, "# 1) Zone number: 1-%d\n", NZONES);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) List of channels: numbers and ranges (N-M) separated by comma\n");
fprintf(out, "#\n");
}
fprintf(out, "Zone Name Channels\n");
for (i=0; i<NZONES; i++) {
zone_t *z = GET_ZONE(i);
zone_ext_t *zext = GET_ZONEXT(i);
if (!VALID_ZONE(z)) {
// Zone is disabled.
continue;
}
fprintf(out, "%4da ", i + 1);
print_unicode(out, z->name, 16, 1);
fprintf(out, " ");
if (z->member_a[0]) {
print_chanlist(out, z->member_a, 16);
if (zext->ext_a[0]) {
fprintf(out, ",");
print_chanlist(out, zext->ext_a, 48);
}
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
fprintf(out, "%4db - ", i + 1);
if (zext->member_b[0]) {
print_chanlist(out, zext->member_b, 64);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
}
//
// Scan lists.
//
if (have_scanlists()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of scan lists.\n");
fprintf(out, "# 1) Scan list number: 1-%d\n", NSCANL);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Priority channel 1 (50%% of scans): -, Sel or index\n");
fprintf(out, "# 4) Priority channel 2 (25%% of scans): -, Sel or index\n");
fprintf(out, "# 5) Designated transmit channel: Last, Sel or index\n");
fprintf(out, "# 6) List of channels: numbers and ranges (N-M) separated by comma\n");
fprintf(out, "#\n");
}
fprintf(out, "Scanlist Name PCh1 PCh2 TxCh ");
#ifdef PRINT_EXTENDED_PARAMS
fprintf(out, "Hold Smpl ");
#endif
fprintf(out, "Channels\n");
for (i=0; i<NSCANL; i++) {
scanlist_t *sl = GET_SCANLIST(i);
if (!VALID_SCANLIST(sl)) {
// Scan list is disabled.
continue;
}
fprintf(out, "%5d ", i + 1);
print_unicode(out, sl->name, 16, 1);
if (sl->priority_ch1 == 0xffff) {
fprintf(out, " - ");
} else if (sl->priority_ch1 == 0) {
fprintf(out, " Sel ");
} else {
fprintf(out, " %-4d ", sl->priority_ch1);
}
if (sl->priority_ch2 == 0xffff) {
fprintf(out, "- ");
} else if (sl->priority_ch2 == 0) {
fprintf(out, "Sel ");
} else {
fprintf(out, "%-4d ", sl->priority_ch2);
}
if (sl->tx_designated_ch == 0xffff) {
fprintf(out, "Last ");
} else if (sl->tx_designated_ch == 0) {
fprintf(out, "Sel ");
} else {
fprintf(out, "%-4d ", sl->tx_designated_ch);
}
#ifdef PRINT_EXTENDED_PARAMS
fprintf(out, "%-4d %-4d ",
sl->sign_hold_time * 25, sl->prio_sample_time * 250);
#endif
if (sl->member[0]) {
print_chanlist(out, sl->member, 31);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
}
//
// Contacts.
//
if (have_contacts()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of contacts.\n");
fprintf(out, "# 1) Contact number: 1-%d\n", NCONTACTS);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Call type: Group, Private, All\n");
fprintf(out, "# 4) Call ID: 1...16777215\n");
fprintf(out, "# 5) Call receive tone: -, +\n");
fprintf(out, "#\n");
}
fprintf(out, "Contact Name Type ID RxTone\n");
for (i=0; i<NCONTACTS; i++) {
contact_t *ct = GET_CONTACT(i);
if (!VALID_CONTACT(ct)) {
// Contact is disabled
continue;
}
fprintf(out, "%5d ", i+1);
print_unicode(out, ct->name, 16, 1);
fprintf(out, " %-7s %-8d %s\n",
CONTACT_TYPE[ct->type & 3], CONTACT_ID(ct), ct->receive_tone ? "+" : "-");
}
}
//
// Group lists.
//
if (have_grouplists()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of group lists.\n");
fprintf(out, "# 1) Group list number: 1-%d\n", NGLISTS);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) List of contacts: numbers and ranges (N-M) separated by comma\n");
fprintf(out, "#\n");
}
fprintf(out, "Grouplist Name Contacts\n");
for (i=0; i<NGLISTS; i++) {
grouplist_t *gl = GET_GROUPLIST(i);
if (!VALID_GROUPLIST(gl)) {
// Group list is disabled.
continue;
}
fprintf(out, "%5d ", i + 1);
print_unicode(out, gl->name, 16, 1);
fprintf(out, " ");
if (gl->member[0]) {
print_chanlist(out, gl->member, 32);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
}
//
// Text messages.
//
if (have_messages()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of text messages.\n");
fprintf(out, "# 1) Message number: 1-%d\n", NMESSAGES);
fprintf(out, "# 2) Text: up to 144 characters\n");
fprintf(out, "#\n");
}
fprintf(out, "Message Text\n");
for (i=0; i<NMESSAGES; i++) {
uint16_t *msg = GET_MESSAGE(i);
if (!VALID_TEXT(msg)) {
// Message is disabled
continue;
}
fprintf(out, "%5d ", i+1);
print_unicode(out, msg, 144, 0);
fprintf(out, "\n");
}
}
// General settings.
print_id(out, verbose);
print_intro(out, verbose);
}
//
// Read memory image from the binary file.
//
static void uv380_read_image(radio_device_t *radio, FILE *img)
{
struct stat st;
// Guess device type by file size.
if (fstat(fileno(img), &st) < 0) {
fprintf(stderr, "Cannot get file size.\n");
exit(-1);
}
switch (st.st_size) {
case MEMSZ:
// IMG file.
if (fread(&radio_mem[0], 1, MEMSZ, img) != MEMSZ) {
fprintf(stderr, "Error reading image data.\n");
exit(-1);
}
break;
case MEMSZ + 0x225 + 0x10:
// RTD file.
// Header 0x225 bytes and footer 0x10 bytes at 0x40225.
fseek(img, 0x225, SEEK_SET);
if (fread(&radio_mem[0], 1, 0x40000, img) != 0x40000) {
fprintf(stderr, "Error reading image data.\n");
exit(-1);
}
fseek(img, 0x10, SEEK_CUR);
if (fread(&radio_mem[0x40000], 1, MEMSZ - 0x40000, img) != MEMSZ - 0x40000) {
fprintf(stderr, "Error reading image data.\n");
exit(-1);
}
break;
default:
fprintf(stderr, "Unrecognized file size %u bytes.\n", (int) st.st_size);
exit(-1);
}
}
//
// Save memory image to the binary file.
//
static void uv380_save_image(radio_device_t *radio, FILE *img)
{
fwrite(&radio_mem[0], 1, MEMSZ, img);
}
//
// Erase all channels.
//
static void erase_channels()
{
int i;
for (i=0; i<NCHAN; i++) {
erase_channel(i);
}
}
//
// Erase all zones.
//
static void erase_zones()
{
int i;
for (i=0; i<NZONES; i++) {
erase_zone(i);
}
}
//
// Erase all scanlists.
//
static void erase_scanlists()
{
int i;
for (i=0; i<NSCANL; i++) {
erase_scanlist(i);
}
}
//
// Erase all contacts.
//
static void erase_contacts()
{
int i;
for (i=0; i<NCONTACTS; i++) {
erase_contact(i);
}
}
//
// Parse the scalar parameter.
//
static void uv380_parse_parameter(radio_device_t *radio, char *param, char *value)
{
general_settings_t *gs = GET_SETTINGS();
if (strcasecmp("Radio", param) == 0) {
if (!radio_is_compatible(value)) {
fprintf(stderr, "Incompatible model: %s\n", value);
exit(-1);
}
return;
}
if (strcasecmp ("Name", param) == 0) {
utf8_decode(gs->radio_name, value, 16);
return;
}
if (strcasecmp ("ID", param) == 0) {
uint32_t id = strtoul(value, 0, 0);
gs->radio_id[0] = id;
gs->radio_id[1] = id >> 8;
gs->radio_id[2] = id >> 16;
return;
}
if (strcasecmp ("Last Programmed Date", param) == 0) {
// Ignore.
return;
}
if (strcasecmp ("CPS Software Version", param) == 0) {
// Ignore.
return;
}
if (strcasecmp ("Intro Line 1", param) == 0) {
utf8_decode(gs->intro_line1, value, 10);
return;
}
if (strcasecmp ("Intro Line 2", param) == 0) {
utf8_decode(gs->intro_line2, value, 10);
return;
}
fprintf(stderr, "Unknown parameter: %s = %s\n", param, value);
exit(-1);
}
//
// Parse one line of Digital channel table.
// Start_flag is 1 for the first table row.
// Return 0 on failure.
//
static int parse_digital_channel(radio_device_t *radio, int first_row, char *line)
{
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
char power_str[256], scanlist_str[256];
char tot_str[256], rxonly_str[256], admit_str[256], colorcode_str[256];
char slot_str[256], grouplist_str[256], contact_str[256];
int num, power, scanlist, tot, rxonly, admit;
int colorcode, timeslot, grouplist, contact;
double rx_mhz, tx_mhz;
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s",
num_str, name_str, rxfreq_str, offset_str,
power_str, scanlist_str,
tot_str, rxonly_str, admit_str, colorcode_str,
slot_str, grouplist_str, contact_str) != 13)
return 0;
num = atoi(num_str);
if (num < 1 || num > NCHAN) {
fprintf(stderr, "Bad channel number.\n");
return 0;
}
if (sscanf(rxfreq_str, "%lf", &rx_mhz) != 1 ||
!is_valid_frequency(rx_mhz)) {
fprintf(stderr, "Bad receive frequency.\n");
return 0;
}
if (sscanf(offset_str, "%lf", &tx_mhz) != 1) {
badtx: fprintf(stderr, "Bad transmit frequency.\n");
return 0;
}
if (offset_str[0] == '-' || offset_str[0] == '+')
tx_mhz += rx_mhz;
if (! is_valid_frequency(tx_mhz))
goto badtx;
if (strcasecmp("High", power_str) == 0) {
power = POWER_HIGH;
} else if (strcasecmp("Mid", power_str) == 0) {
power = POWER_MIDDLE;
} else if (strcasecmp("Low", power_str) == 0) {
power = POWER_LOW;
} else {
fprintf(stderr, "Bad power level.\n");
return 0;
}
if (*scanlist_str == '-') {
scanlist = 0;
} else {
scanlist = atoi(scanlist_str);
if (scanlist == 0 || scanlist > NSCANL) {
fprintf(stderr, "Bad scanlist.\n");
return 0;
}
}
tot = atoi(tot_str);
if (tot > 555 || tot % 15 != 0) {
fprintf(stderr, "Bad timeout timer.\n");
return 0;
}
tot /= 15;
if (*rxonly_str == '-') {
rxonly = 0;
} else if (*rxonly_str == '+') {
rxonly = 1;
} else {
fprintf(stderr, "Bad receive only flag.\n");
return 0;
}
if (*admit_str == '-' || strcasecmp("Always", admit_str) == 0) {
admit = ADMIT_ALWAYS;
} else if (strcasecmp("Free", admit_str) == 0) {
admit = ADMIT_CH_FREE;
} else if (strcasecmp("Color", admit_str) == 0) {
admit = ADMIT_COLOR;
} else {
fprintf(stderr, "Bad admit criteria.\n");
return 0;
}
colorcode = atoi(colorcode_str);
if (colorcode < 0 || colorcode > 15) {
fprintf(stderr, "Bad color code.\n");
return 0;
}
timeslot = atoi(slot_str);
if (timeslot < 1 || timeslot > 2) {
fprintf(stderr, "Bad timeslot.\n");
return 0;
}
if (*grouplist_str == '-') {
grouplist = 0;
} else {
grouplist = atoi(grouplist_str);
if (grouplist == 0 || grouplist > NGLISTS) {
fprintf(stderr, "Bad receive grouplist.\n");
return 0;
}
}
if (*contact_str == '-') {
contact = 0;
} else {
contact = atoi(contact_str);
if (contact == 0 || contact > NCONTACTS) {
fprintf(stderr, "Bad transmit contact.\n");
return 0;
}
}
if (first_row && radio->channel_count == 0) {
// On first entry, erase all channels, zones and scanlists.
erase_channels();
erase_zones();
erase_scanlists();
}
setup_channel(num-1, MODE_DIGITAL, name_str, rx_mhz, tx_mhz,
power, scanlist, 1, tot, rxonly, admit, colorcode,
timeslot, grouplist, contact, 0xffff, 0xffff, BW_12_5_KHZ);
radio->channel_count++;
return 1;
}
//
// Parse one line of Analog channel table.
// Start_flag is 1 for the first table row.
// Return 0 on failure.
//
static int parse_analog_channel(radio_device_t *radio, int first_row, char *line)
{
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
char power_str[256], scanlist_str[256], squelch_str[256];
char tot_str[256], rxonly_str[256], admit_str[256];
char rxtone_str[256], txtone_str[256], width_str[256];
int num, power, scanlist, squelch, tot, rxonly, admit;
int rxtone, txtone, width;
double rx_mhz, tx_mhz;
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s",
num_str, name_str, rxfreq_str, offset_str,
power_str, scanlist_str,
tot_str, rxonly_str, admit_str, squelch_str,
rxtone_str, txtone_str, width_str) != 13)
return 0;
num = atoi(num_str);
if (num < 1 || num > NCHAN) {
fprintf(stderr, "Bad channel number.\n");
return 0;
}
if (sscanf(rxfreq_str, "%lf", &rx_mhz) != 1 ||
!is_valid_frequency(rx_mhz)) {
fprintf(stderr, "Bad receive frequency.\n");
return 0;
}
if (sscanf(offset_str, "%lf", &tx_mhz) != 1) {
badtx: fprintf(stderr, "Bad transmit frequency.\n");
return 0;
}
if (offset_str[0] == '-' || offset_str[0] == '+')
tx_mhz += rx_mhz;
if (! is_valid_frequency(tx_mhz))
goto badtx;
if (strcasecmp("High", power_str) == 0) {
power = POWER_HIGH;
} else if (strcasecmp("Mid", power_str) == 0) {
power = POWER_MIDDLE;
} else if (strcasecmp("Low", power_str) == 0) {
power = POWER_LOW;
} else {
fprintf(stderr, "Bad power level.\n");
return 0;
}
if (*scanlist_str == '-') {
scanlist = 0;
} else {
scanlist = atoi(scanlist_str);
if (scanlist == 0 || scanlist > NSCANL) {
fprintf(stderr, "Bad scanlist.\n");
return 0;
}
}
squelch = atoi(squelch_str);
if (squelch > 9) {
fprintf(stderr, "Bad squelch level.\n");
return 0;
}
tot = atoi(tot_str);
if (tot > 555 || tot % 15 != 0) {
fprintf(stderr, "Bad timeout timer.\n");
return 0;
}
tot /= 15;
if (*rxonly_str == '-') {
rxonly = 0;
} else if (*rxonly_str == '+') {
rxonly = 1;
} else {
fprintf(stderr, "Bad receive only flag.\n");
return 0;
}
if (*admit_str == '-' || strcasecmp("Always", admit_str) == 0) {
admit = ADMIT_ALWAYS;
} else if (strcasecmp("Free", admit_str) == 0) {
admit = ADMIT_CH_FREE;
} else if (strcasecmp("Tone", admit_str) == 0) {
admit = ADMIT_TONE;
} else {
fprintf(stderr, "Bad admit criteria.\n");
return 0;
}
rxtone = encode_tone(rxtone_str);
if (rxtone < 0) {
fprintf(stderr, "Bad receive tone.\n");
return 0;
}
txtone = encode_tone(txtone_str);
if (txtone < 0) {
fprintf(stderr, "Bad transmit tone.\n");
return 0;
}
if (strcasecmp ("12.5", width_str) == 0) {
width = BW_12_5_KHZ;
} else if (strcasecmp ("20", width_str) == 0) {
width = BW_20_KHZ;
} else if (strcasecmp ("25", width_str) == 0) {
width = BW_25_KHZ;
} else {
fprintf (stderr, "Bad width.\n");
return 0;
}
if (first_row && radio->channel_count == 0) {
// On first entry, erase all channels, zones and scanlists.
erase_channels();
}
setup_channel(num-1, MODE_ANALOG, name_str, rx_mhz, tx_mhz,
power, scanlist, squelch, tot, rxonly, admit,
1, 1, 0, 0, rxtone, txtone, width);
radio->channel_count++;
return 1;
}
//
// Parse one line of Zones table.
// Return 0 on failure.
//
static int parse_zones(int first_row, char *line)
{
char num_str[256], name_str[256], chan_str[256], *eptr;
int znum, b_flag;
if (sscanf(line, "%s %s %s", num_str, name_str, chan_str) != 3)
return 0;
znum = strtoul(num_str, &eptr, 10);
if (znum < 1 || znum > NZONES || strchr("aAbB", *eptr) == 0) {
fprintf(stderr, "Bad zone number.\n");
return 0;
}
b_flag = (*eptr == 'b' || *eptr == 'B');
if (first_row) {
// On first entry, erase the Zones table.
erase_zones();
}
if (b_flag == 0)
setup_zone(znum-1, name_str);
if (*chan_str != '-') {
char *str = chan_str;
int nchan = 0;
int range = 0;
int last = 0;
// Parse channel list.
for (;;) {
char *eptr;
int cnum = strtoul(str, &eptr, 10);
if (eptr == str) {
fprintf(stderr, "Zone %d: wrong channel list '%s'.\n", znum, str);
return 0;
}
if (cnum < 1 || cnum > NCHAN) {
fprintf(stderr, "Zone %d: wrong channel number %d.\n", znum, cnum);
return 0;
}
if (range) {
// Add range.
int c;
for (c=last+1; c<=cnum; c++) {
if (!zone_append(znum-1, b_flag, c)) {
fprintf(stderr, "Zone %d: too many channels.\n", znum);
return 0;
}
nchan++;
}
} else {
// Add single channel.
if (!zone_append(znum-1, b_flag, cnum)) {
fprintf(stderr, "Zone %d: too many channels.\n", znum);
return 0;
}
nchan++;
}
if (*eptr == 0)
break;
if (*eptr != ',' && *eptr != '-') {
fprintf(stderr, "Zone %d: wrong channel list '%s'.\n", znum, eptr);
return 0;
}
range = (*eptr == '-');
last = cnum;
str = eptr + 1;
}
}
return 1;
}
//
// Parse one line of Scanlist table.
// Return 0 on failure.
//
static int parse_scanlist(int first_row, char *line)
{
char num_str[256], name_str[256], prio1_str[256], prio2_str[256];
char tx_str[256], chan_str[256];
int snum, prio1, prio2, txchan;
if (sscanf(line, "%s %s %s %s %s %s",
num_str, name_str, prio1_str, prio2_str, tx_str, chan_str) != 6)
return 0;
snum = atoi(num_str);
if (snum < 1 || snum > NSCANL) {
fprintf(stderr, "Bad scan list number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Scanlists table.
erase_scanlists();
}
if (*prio1_str == '-') {
prio1 = 0xffff;
} else if (strcasecmp("Sel", prio1_str) == 0) {
prio1 = 0;
} else {
prio1 = atoi(prio1_str);
if (prio1 < 1 || prio1 > NCHAN) {
fprintf(stderr, "Bad priority channel 1.\n");
return 0;
}
}
if (*prio2_str == '-') {
prio2 = 0xffff;
} else if (strcasecmp("Sel", prio2_str) == 0) {
prio2 = 0;
} else {
prio2 = atoi(prio2_str);
if (prio2 < 1 || prio2 > NCHAN) {
fprintf(stderr, "Bad priority channel 2.\n");
return 0;
}
}
if (strcasecmp("Last", tx_str) == 0) {
txchan = 0xffff;
} else if (strcasecmp("Sel", tx_str) == 0) {
txchan = 0;
} else {
txchan = atoi(tx_str);
if (txchan < 1 || txchan > NCHAN) {
fprintf(stderr, "Bad transmit channel.\n");
return 0;
}
}
setup_scanlist(snum-1, name_str, prio1, prio2, txchan);
if (*chan_str != '-') {
char *str = chan_str;
int nchan = 0;
int range = 0;
int last = 0;
// Parse channel list.
for (;;) {
char *eptr;
int cnum = strtoul(str, &eptr, 10);
if (eptr == str) {
fprintf(stderr, "Scan list %d: wrong channel list '%s'.\n", snum, str);
return 0;
}
if (cnum < 1 || cnum > NCHAN) {
fprintf(stderr, "Scan list %d: wrong channel number %d.\n", snum, cnum);
return 0;
}
if (range) {
// Add range.
int c;
for (c=last+1; c<=cnum; c++) {
if (!scanlist_append(snum-1, c)) {
fprintf(stderr, "Scan list %d: too many channels.\n", snum);
return 0;
}
nchan++;
}
} else {
// Add single channel.
if (!scanlist_append(snum-1, cnum)) {
fprintf(stderr, "Scan list %d: too many channels.\n", snum);
return 0;
}
nchan++;
}
if (*eptr == 0)
break;
if (*eptr != ',' && *eptr != '-') {
fprintf(stderr, "Scan list %d: wrong channel list '%s'.\n", snum, eptr);
return 0;
}
range = (*eptr == '-');
last = cnum;
str = eptr + 1;
}
}
return 1;
}
//
// Parse one line of Contacts table.
// Return 0 on failure.
//
static int parse_contact(int first_row, char *line)
{
char num_str[256], name_str[256], type_str[256], id_str[256], rxtone_str[256];
int cnum, type, id, rxtone;
if (sscanf(line, "%s %s %s %s %s",
num_str, name_str, type_str, id_str, rxtone_str) != 5)
return 0;
cnum = atoi(num_str);
if (cnum < 1 || cnum > NCONTACTS) {
fprintf(stderr, "Bad contact number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Contacts table.
erase_contacts();
}
if (strcasecmp("Group", type_str) == 0) {
type = CALL_GROUP;
} else if (strcasecmp("Private", type_str) == 0) {
type = CALL_PRIVATE;
} else if (strcasecmp("All", type_str) == 0) {
type = CALL_ALL;
} else {
fprintf(stderr, "Bad call type.\n");
return 0;
}
id = atoi(id_str);
if (id < 1 || id > 0xffffff) {
fprintf(stderr, "Bad call ID.\n");
return 0;
}
if (*rxtone_str == '-' || strcasecmp("No", rxtone_str) == 0) {
rxtone = 0;
} else if (*rxtone_str == '+' || strcasecmp("Yes", rxtone_str) == 0) {
rxtone = 1;
} else {
fprintf(stderr, "Bad receive tone flag.\n");
return 0;
}
setup_contact(cnum-1, name_str, type, id, rxtone);
return 1;
}
//
// Parse one line of Grouplist table.
// Return 0 on failure.
//
static int parse_grouplist(int first_row, char *line)
{
char num_str[256], name_str[256], list_str[256];
int glnum;
if (sscanf(line, "%s %s %s", num_str, name_str, list_str) != 3)
return 0;
glnum = strtoul(num_str, 0, 10);
if (glnum < 1 || glnum > NGLISTS) {
fprintf(stderr, "Bad group list number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Grouplists table.
memset(&radio_mem[OFFSET_GLISTS], 0, NGLISTS*96);
}
setup_grouplist(glnum-1, name_str);
if (*list_str != '-') {
char *str = list_str;
int range = 0;
int last = 0;
// Parse contact list.
for (;;) {
char *eptr;
int cnum = strtoul(str, &eptr, 10);
if (eptr == str) {
fprintf(stderr, "Group list %d: wrong contact list '%s'.\n", glnum, str);
return 0;
}
if (cnum < 1 || cnum > NCONTACTS) {
fprintf(stderr, "Group list %d: wrong contact number %d.\n", glnum, cnum);
return 0;
}
if (range) {
// Add range.
int c;
for (c=last+1; c<=cnum; c++) {
if (!grouplist_append(glnum-1, c)) {
fprintf(stderr, "Group list %d: too many contacts.\n", glnum);
return 0;
}
}
} else {
// Add single contact.
if (!grouplist_append(glnum-1, cnum)) {
fprintf(stderr, "Group list %d: too many contacts.\n", glnum);
return 0;
}
}
if (*eptr == 0)
break;
if (*eptr != ',' && *eptr != '-') {
fprintf(stderr, "Group list %d: wrong contact list '%s'.\n", glnum, eptr);
return 0;
}
range = (*eptr == '-');
last = cnum;
str = eptr + 1;
}
}
return 1;
}
//
// Parse one line of Messages table.
// Return 0 on failure.
//
static int parse_messages(int first_row, char *line)
{
char *text;
int mnum;
mnum = strtoul(line, &text, 10);
if (text == line || mnum < 1 || mnum > NMESSAGES) {
fprintf(stderr, "Bad message number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Messages table.
memset(&radio_mem[OFFSET_MSG], 0, NMESSAGES*288);
}
setup_message(mnum-1, text);
return 1;
}
//
// Parse table header.
// Return table id, or 0 in case of error.
//
static int uv380_parse_header(radio_device_t *radio, char *line)
{
if (strncasecmp(line, "Digital", 7) == 0)
return 'D';
if (strncasecmp(line, "Analog", 6) == 0)
return 'A';
if (strncasecmp(line, "Zone", 4) == 0)
return 'Z';
if (strncasecmp(line, "Scanlist", 8) == 0)
return 'S';
if (strncasecmp(line, "Contact", 7) == 0)
return 'C';
if (strncasecmp(line, "Grouplist", 9) == 0)
return 'G';
if (strncasecmp(line, "Message", 7) == 0)
return 'M';
return 0;
}
//
// Parse one line of table data.
// Return 0 on failure.
//
static int uv380_parse_row(radio_device_t *radio, int table_id, int first_row, char *line)
{
switch (table_id) {
case 'D': return parse_digital_channel(radio, first_row, line);
case 'A': return parse_analog_channel(radio, first_row, line);
case 'Z': return parse_zones(first_row, line);
case 'S': return parse_scanlist(first_row, line);
case 'C': return parse_contact(first_row, line);
case 'G': return parse_grouplist(first_row, line);
case 'M': return parse_messages(first_row, line);
}
return 0;
}
//
// Update timestamp.
//
static void uv380_update_timestamp(radio_device_t *radio)
{
unsigned char *timestamp = GET_TIMESTAMP();
char p[16];
// Last Programmed Date
get_timestamp(p);
timestamp[0] = ((p[0] & 0xf) << 4) | (p[1] & 0xf); // year upper
timestamp[1] = ((p[2] & 0xf) << 4) | (p[3] & 0xf); // year lower
timestamp[2] = ((p[4] & 0xf) << 4) | (p[5] & 0xf); // month
timestamp[3] = ((p[6] & 0xf) << 4) | (p[7] & 0xf); // day
timestamp[4] = ((p[8] & 0xf) << 4) | (p[9] & 0xf); // hour
timestamp[5] = ((p[10] & 0xf) << 4) | (p[11] & 0xf); // minute
timestamp[6] = ((p[12] & 0xf) << 4) | (p[13] & 0xf); // second
// CPS Software Version: Vdx.xx
const char *dot = strchr(VERSION, '.');
if (dot) {
timestamp[7] = 0x0d; // Prints as '='
timestamp[8] = dot[-1] & 0x0f;
if (dot[2] == '.') {
timestamp[9] = 0;
timestamp[10] = dot[1] & 0x0f;
} else {
timestamp[9] = dot[1] & 0x0f;
timestamp[10] = dot[2] & 0x0f;
}
}
}
//
// Check that configuration is correct.
// Return 0 on error.
//
static int uv380_verify_config(radio_device_t *radio)
{
int i, k, nchannels = 0, nzones = 0, nscanlists = 0, ngrouplists = 0;
int ncontacts = 0, nerrors = 0;
// Channels: check references to scanlists, contacts and grouplists.
for (i=0; i<NCHAN; i++) {
channel_t *ch = GET_CHANNEL(i);
if (!VALID_CHANNEL(ch))
continue;
nchannels++;
if (ch->scan_list_index != 0) {
scanlist_t *sl = GET_SCANLIST(ch->scan_list_index - 1);
if (!VALID_SCANLIST(sl)) {
fprintf(stderr, "Channel %d '", i+1);
print_unicode(stderr, ch->name, 16, 0);
fprintf(stderr, "': scanlist %d not found.\n", ch->scan_list_index);
nerrors++;
}
}
if (ch->contact_name_index != 0) {
contact_t *ct = GET_CONTACT(ch->contact_name_index - 1);
if (!VALID_CONTACT(ct)) {
fprintf(stderr, "Channel %d '", i+1);
print_unicode(stderr, ch->name, 16, 0);
fprintf(stderr, "': contact %d not found.\n", ch->contact_name_index);
nerrors++;
}
}
if (ch->group_list_index != 0) {
grouplist_t *gl = GET_GROUPLIST(ch->group_list_index - 1);
if (!VALID_GROUPLIST(gl)) {
fprintf(stderr, "Channel %d '", i+1);
print_unicode(stderr, ch->name, 16, 0);
fprintf(stderr, "': grouplist %d not found.\n", ch->group_list_index);
nerrors++;
}
}
}
// Zones: check references to channels.
for (i=0; i<NZONES; i++) {
zone_t *z = GET_ZONE(i);
zone_ext_t *zext = GET_ZONEXT(i);
if (!VALID_ZONE(z))
continue;
nzones++;
// Zone A
for (k=0; k<16; k++) {
int cnum = z->member_a[k];
if (cnum != 0) {
channel_t *ch = GET_CHANNEL(cnum - 1);
if (!VALID_CHANNEL(ch)) {
fprintf(stderr, "Zone %da '", i+1);
print_unicode(stderr, z->name, 16, 0);
fprintf(stderr, "': channel %d not found.\n", cnum);
nerrors++;
}
}
}
for (k=0; k<48; k++) {
int cnum = zext->ext_a[k];
if (cnum != 0) {
channel_t *ch = GET_CHANNEL(cnum - 1);
if (!VALID_CHANNEL(ch)) {
fprintf(stderr, "Zone %da '", i+1);
print_unicode(stderr, z->name, 16, 0);
fprintf(stderr, "': channel %d not found.\n", cnum);
nerrors++;
}
}
}
// Zone B
for (k=0; k<64; k++) {
int cnum = zext->member_b[k];
if (cnum != 0) {
channel_t *ch = GET_CHANNEL(cnum - 1);
if (!VALID_CHANNEL(ch)) {
fprintf(stderr, "Zone %db '", i+1);
print_unicode(stderr, z->name, 16, 0);
fprintf(stderr, "': channel %d not found.\n", cnum);
nerrors++;
}
}
}
}
// Scanlists: check references to channels.
for (i=0; i<NSCANL; i++) {
scanlist_t *sl = GET_SCANLIST(i);
if (!VALID_SCANLIST(sl))
continue;
nscanlists++;
for (k=0; k<31; k++) {
int cnum = sl->member[k];
if (cnum != 0) {
channel_t *ch = GET_CHANNEL(cnum - 1);
if (!VALID_CHANNEL(ch)) {
fprintf(stderr, "Scanlist %d '", i+1);
print_unicode(stderr, sl->name, 16, 0);
fprintf(stderr, "': channel %d not found.\n", cnum);
nerrors++;
}
}
}
}
// Grouplists: check references to contacts.
for (i=0; i<NGLISTS; i++) {
grouplist_t *gl = GET_GROUPLIST(i);
if (!VALID_GROUPLIST(gl))
continue;
ngrouplists++;
for (k=0; k<32; k++) {
int cnum = gl->member[k];
if (cnum != 0) {
contact_t *ct = GET_CONTACT(cnum - 1);
if (!VALID_CONTACT(ct)) {
fprintf(stderr, "Grouplist %d '", i+1);
print_unicode(stderr, gl->name, 16, 0);
fprintf(stderr, "': contact %d not found.\n", cnum);
nerrors++;
}
}
}
}
// Count contacts.
for (i=0; i<NCONTACTS; i++) {
contact_t *ct = GET_CONTACT(i);
if (VALID_CONTACT(ct))
ncontacts++;
}
if (nerrors > 0) {
fprintf(stderr, "Total %d errors.\n", nerrors);
return 0;
}
fprintf(stderr, "Total %d channels, %d zones, %d scanlists, %d contacts, %d grouplists.\n",
nchannels, nzones, nscanlists, ncontacts, ngrouplists);
return 1;
}
//
// Build search index of callsign table.
// Callsigns are supposed to be sorted by id.
//
// Region 0x200003-0x204002 of configuration memory contains a search helper
// for the ContactsCSV table. The helper is organized as a list
// of pairs <idbase, index>:
// idbase - high bits 23:12 of DMR ID
// index - number in ContactsCSV table, starting from 1 (20 bits)
//
// For example:
// id[23:12]
// Ncontacts | index[19:0]
// vvvvvvvv //\ /||\\.
// 200000 00 40 00 5a d0 00 01 5a e0 10 00 5a f0 20 00 5b .@.Z...Z...Z. .[
// 200010 00 30 00 5b 10 40 00 ff ff ff ff ff ff ff ff ff .0.[.@..........
// 200020 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
// *
// 204000 ff ff ff
//
static void build_callsign_index(uint8_t *mem, int nrecords)
{
uint8_t *p;
int index;
// Number of contacts.
mem[0] = nrecords >> 16;
mem[1] = nrecords >> 8;
mem[2] = nrecords;
// Callsign index starting from 1.
index = 1;
p = &mem[3];
for (;;) {
int id = GET_CALLSIGN(mem, index-1)->dmrid;
// Add index item.
*p++ = id >> 16;
*p++ = ((id >> 8) & 0xf0) | (index >> 16);
*p++ = index >> 8;
*p++ = index;
// Skip callsigns with the same id[23:12].
do {
index++;
if (index > nrecords)
return;
} while ((GET_CALLSIGN(mem, index-1)->dmrid >> 12) == (id >> 12));
}
}
//
// Write CSV file to contacts database.
//
static void uv380_write_csv(radio_device_t *radio, FILE *csv)
{
uint8_t *mem;
char line[256], *callsign, *name;
int id, bno, nbytes, nrecords = 0;
unsigned finish;
callsign_t *cs;
// Allocate 14Mbytes of memory.
nbytes = CALLSIGN_FINISH - CALLSIGN_START;
mem = malloc(nbytes);
if (!mem) {
fprintf(stderr, "Out of memory!\n");
return;
}
memset(mem, 0xff, nbytes);
// Parse CSV file.
while (fgets(line, sizeof(line), csv)) {
if (line[0] < '0' || line[0] > '9') {
// Skip header.
continue;
}
// Strip trailing spaces and newline.
char *e = line + strlen(line) - 1;
while (e >= line && (*e=='\n' || *e=='\r' || *e==' ' || *e=='\t'))
*e-- = 0;
id = strtoul(line, 0, 10);
if (id < 1 || id > 0xffffff) {
fprintf(stderr, "Bad id: %d\n", id);
fprintf(stderr, "Line: '%s'\n", line);
return;
}
callsign = strchr(line, ',');
if (! callsign) {
fprintf(stderr, "Cannot find callsign!\n");
fprintf(stderr, "Line: '%s'\n", line);
return;
}
*callsign++ = 0;
name = strchr(callsign, ',');
if (! name) {
fprintf(stderr, "Cannot find name!\n");
fprintf(stderr, "Line: '%s,%s'\n", line, callsign);
return;
}
*name++ = 0;
//printf("%-10d%-10s%s\n", id, callsign, name);
cs = GET_CALLSIGN(mem, nrecords);
nrecords++;
// Fill callsign structure.
cs->dmrid = id;
strncpy(cs->callsign, callsign, sizeof(cs->callsign));
strncpy(cs->name, name, sizeof(cs->name));
}
fprintf(stderr, "Total %d contacts.\n", nrecords);
build_callsign_index(mem, nrecords);
#if 0
print_hex(mem, 0x4003);
exit(0);
#endif
// Align to 1kbyte.
finish = CALLSIGN_START + (CALLSIGN_OFFSET + nrecords*120 + 1023) / 1024 * 1024;
if (finish > CALLSIGN_FINISH) {
// Limit is 122197 contacts.
fprintf(stderr, "Too many contacts!\n");
return;
}
radio_progress = 0;
if (! trace_flag) {
fprintf(stderr, "Erase contacts: ");
fflush(stderr);
}
// Erase whole region.
// Align finish to 64kbytes.
dfu_erase(CALLSIGN_START, (finish + 0xffff) / 0x10000 * 0x10000);
if (! trace_flag) {
fprintf(stderr, "# done.\n");
fprintf(stderr, "Write contacts: ");
fflush(stderr);
}
// Write callsigns.
for (bno = CALLSIGN_START/1024; bno < finish/1024; bno++) {
dfu_write_block(bno, &mem[bno*1024 - CALLSIGN_START], 1024);
++radio_progress;
if (radio_progress % 512 == 0) {
fprintf(stderr, "#");
fflush(stderr);
}
}
if (! trace_flag)
fprintf(stderr, "# done.\n");
free(mem);
}
//
// TYT MD-UV380
//
radio_device_t radio_uv380 = {
"TYT MD-UV380",
uv380_download,
uv380_upload,
uv380_is_compatible,
uv380_read_image,
uv380_save_image,
uv380_print_version,
uv380_print_config,
uv380_verify_config,
uv380_parse_parameter,
uv380_parse_header,
uv380_parse_row,
uv380_update_timestamp,
uv380_write_csv,
};
//
// TYT MD-UV390
//
radio_device_t radio_uv390 = {
"TYT MD-UV390",
uv380_download,
uv380_upload,
uv380_is_compatible,
uv380_read_image,
uv380_save_image,
uv380_print_version,
uv380_print_config,
uv380_verify_config,
uv380_parse_parameter,
uv380_parse_header,
uv380_parse_row,
uv380_update_timestamp,
uv380_write_csv,
};
//
// TYT MD-2017
//
radio_device_t radio_md2017 = {
"TYT MD-2017",
uv380_download,
uv380_upload,
uv380_is_compatible,
uv380_read_image,
uv380_save_image,
uv380_print_version,
uv380_print_config,
uv380_verify_config,
uv380_parse_parameter,
uv380_parse_header,
uv380_parse_row,
uv380_update_timestamp,
uv380_write_csv,
};
//
// TYT MD-9600
//
radio_device_t radio_md9600 = {
"TYT MD-9600",
uv380_download,
uv380_upload,
uv380_is_compatible,
uv380_read_image,
uv380_save_image,
uv380_print_version,
uv380_print_config,
uv380_verify_config,
uv380_parse_parameter,
uv380_parse_header,
uv380_parse_row,
uv380_update_timestamp,
uv380_write_csv,
};
//
// Baofeng DM-1701, Retevis RT84
//
radio_device_t radio_rt84 = {
"Retevis RT84",
uv380_download,
uv380_upload,
uv380_is_compatible,
uv380_read_image,
uv380_save_image,
uv380_print_version,
uv380_print_config,
uv380_verify_config,
uv380_parse_parameter,
uv380_parse_header,
uv380_parse_row,
uv380_update_timestamp,
uv380_write_csv,
};