dmrconfig/rd5r.c
2018-10-04 19:51:10 -07:00

2342 lines
63 KiB
C

/*
* Interface to Baofeng RD-5R.
*
* Copyright (C) 2018 Serge Vakulenko, KK6ABQ
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
* EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <unistd.h>
#include <stdint.h>
#include <sys/stat.h>
#include "radio.h"
#include "util.h"
#define NCHAN 1024
#define NCONTACTS 256
#define NZONES 250
#define NGLISTS 64
#define NSCANL 250
#define NMESSAGES 32
#define MEMSZ 0x20000
#define OFFSET_TIMESTMP 0x00088
#define OFFSET_SETTINGS 0x000e0
#define OFFSET_MSGTAB 0x00128
#define OFFSET_CONTACTS 0x01788
#define OFFSET_BANK_0 0x03780 // Channels 1-128
#define OFFSET_INTRO 0x07540
#define OFFSET_ZONETAB 0x08010
#define OFFSET_BANK_1 0x0b1b0 // Channels 129-1024
#define OFFSET_SCANTAB 0x17620
#define OFFSET_GROUPTAB 0x1d620
#define GET_TIMESTAMP() (&radio_mem[OFFSET_TIMESTMP])
#define GET_SETTINGS() ((general_settings_t*) &radio_mem[OFFSET_SETTINGS])
#define GET_INTRO() ((intro_text_t*) &radio_mem[OFFSET_INTRO])
#define GET_ZONETAB() ((zonetab_t*) &radio_mem[OFFSET_ZONETAB])
#define GET_SCANTAB(i) ((scantab_t*) &radio_mem[OFFSET_SCANTAB])
#define GET_CONTACT(i) ((contact_t*) &radio_mem[OFFSET_CONTACTS + (i)*24])
#define GET_GROUPTAB() ((grouptab_t*) &radio_mem[OFFSET_GROUPTAB])
#define GET_MSGTAB() ((msgtab_t*) &radio_mem[OFFSET_MSGTAB])
#define VALID_TEXT(txt) (*(txt) != 0 && *(txt) != 0xff)
#define VALID_CONTACT(ct) VALID_TEXT((ct)->name)
//
// Channel data.
//
typedef struct {
// Bytes 0-15
uint8_t name[16]; // Channel Name
// Bytes 16-23
uint32_t rx_frequency; // RX Frequency: 8 digits BCD
uint32_t tx_frequency; // TX Frequency: 8 digits BCD
// Byte 24
uint8_t channel_mode; // Mode: Analog or Digital
#define MODE_ANALOG 0
#define MODE_DIGITAL 1
// Bytes 25-26
uint8_t _unused25[2]; // 0
// Bytes 27-28
uint8_t tot; // TOT x 15sec: 0-Infinite, 1=15s... 33=495s
uint8_t tot_rekey_delay; // TOT Rekey Delay: 0s...255s
// Byte 29
uint8_t admit_criteria; // Admit Criteria: Always, Channel Free or Color Code
#define ADMIT_ALWAYS 0
#define ADMIT_CH_FREE 1
#define ADMIT_COLOR 2
// Bytes 30-31
uint8_t _unused30; // 0x50
uint8_t scan_list_index; // Scan List: None, ScanList1...250
// Bytes 32-35
uint16_t ctcss_dcs_receive; // CTCSS/DCS Dec: 4 digits BCD or 0xffff
uint16_t ctcss_dcs_transmit; // CTCSS/DCS Enc: 4 digits BCD
// Bytes 36-39
uint8_t _unused36; // 0
uint8_t tx_signaling_syst; // Tx Signaling System: Off, DTMF
uint8_t _unused38; // 0
uint8_t rx_signaling_syst; // Rx Signaling System: Off, DTMF
// Bytes 40-43
uint8_t _unused40; // 0x16
uint8_t privacy_group; // Privacy Group: 0=None, 1=53474c39
#define PRIVGR_NONE 0
#define PRIVGR_53474C39 1
uint8_t colorcode_tx; // Color Code: 0...15
uint8_t group_list_index; // Group List: None, GroupList1...128
// Bytes 44-47
uint8_t colorcode_rx; // Color Code: 0...15
uint8_t emergency_system_index; // Emergency System: None, System1...32
uint16_t contact_name_index; // Contact Name: Contact1...
// Byte 48
uint8_t _unused48 : 6, // 0
emergency_alarm_ack : 1, // Emergency Alarm Ack
data_call_conf : 1; // Data Call Confirmed
// Byte 49
uint8_t private_call_conf : 1, // Private Call Confirmed
_unused49_1 : 3, // 0
privacy : 1, // Privacy: Off or On
_unused49_5 : 1, // 0
repeater_slot2 : 1, // Repeater Slot: 0=slot1 or 1=slot2
_unused49_7 : 1; // 0
// Byte 50
uint8_t dcdm : 1, // Dual Capacity Direct Mode
_unused50_1 : 4, // 0
non_ste_frequency : 1, // Non STE = Frequency
_unused50_6 : 2; // 0
// Byte 51
uint8_t _unused51_0 : 1, // 0
bandwidth : 1, // Bandwidth: 12.5 or 25 kHz
#define BW_12_5_KHZ 0
#define BW_25_KHZ 1
rx_only : 1, // RX Only Enable
talkaround : 1, // Allow Talkaround
_unused51_4 : 2, // 0
vox : 1, // VOX Enable
power : 1; // Power: Low, High
#define POWER_HIGH 1
#define POWER_LOW 0
// Bytes 52-55
uint8_t _unused52[3]; // 0
uint8_t squelch; // Squelch: 0...9
} channel_t;
//
// Bank of 128 channels.
//
typedef struct {
uint8_t bitmap[16]; // bit set when channel valid
channel_t chan[128];
} bank_t;
//
// Contact data.
//
typedef struct {
// Bytes 0-15
uint8_t name[16]; // Contact Name, ff terminated
// Bytes 16-19
uint8_t id[4]; // BCD coded 8 digits
#define GET_ID(x) (((x)[0] >> 4) * 10000000 +\
((x)[0] & 15) * 1000000 +\
((x)[1] >> 4) * 100000 +\
((x)[1] & 15) * 10000 +\
((x)[2] >> 4) * 1000 +\
((x)[2] & 15) * 100 +\
((x)[3] >> 4) * 10 +\
((x)[3] & 15))
#define CONTACT_ID(ct) GET_ID((ct)->id)
// Byte 20
uint8_t type; // Call Type: Group Call, Private Call or All Call
#define CALL_GROUP 0
#define CALL_PRIVATE 1
#define CALL_ALL 2
// Bytes 21-23
uint8_t receive_tone; // Call Receive Tone: 0=Off, 1=On
uint8_t ring_style; // Ring style: 0-10
uint8_t _unused23; // 0xff for used contact, 0 for blank entry
} contact_t;
//
// Zone data.
//
typedef struct {
// Bytes 0-15
uint8_t name[16]; // Zone Name
// Bytes 16-47
uint16_t member[16]; // Member: channels 1...16
} zone_t;
//
// Table of zones.
//
typedef struct {
uint8_t bitmap[32]; // bit set when zone valid
zone_t zone[NZONES];
} zonetab_t;
//
// Group list data.
//
typedef struct {
// Bytes 0-15
uint8_t name[16]; // Group List Name
// Bytes 16-47
uint16_t member[16]; // Contacts
} grouplist_t;
//
// Table of group lists.
//
typedef struct {
uint8_t nitems1[128]; // N+1, zero when disabled
grouplist_t grouplist[NGLISTS];
} grouptab_t;
//
// Scan list data.
//
typedef struct {
// Bytes 0-14
uint8_t name[15]; // Scan List Name
// Byte 15
uint8_t _unused : 4, // 0
channel_mark : 1, // Channel Mark, default 1
pl_type : 2, // PL Type, default 3
#define PL_NONPRI 0 // Non-Priority Channel
#define PL_DISABLE 1 // Disable
#define PL_PRI 2 // Priority Channel
#define PL_PRI_NONPRI 3 // Priority and Non-Priority Channels
talkback : 1; // Talkback, default 1
// Bytes 16-79
uint16_t member[32]; // Channels (+1)
#define CHAN_SELECTED 1 // Selected
// Bytes 80-85
uint16_t priority_ch1; // Priority Channel 1, chan+1 or 0=None, 1=Selected
uint16_t priority_ch2; // Priority Channel 2
uint16_t tx_designated_ch; // Tx Designated Channel, chan+1 or 0=Last Active Channel
// Bytes 86-87
uint8_t sign_hold_time; // Signaling Hold Time (x25 = msec) default 40=1000ms
uint8_t prio_sample_time; // Priority Sample Time (x250 = msec) default 8=2000ms
} scanlist_t;
//
// Table of scanlists.
//
typedef struct {
uint8_t valid[256]; // byte=1 when scanlist valid
scanlist_t scanlist[NSCANL];
} scantab_t;
//
// General settings.
//
typedef struct {
// Bytes e0-e7
uint8_t radio_name[8];
// Bytes e8-eb
uint8_t radio_id[4];
} general_settings_t;
//
// Intro messages.
//
typedef struct {
// Bytes 7540-754f
uint8_t intro_line1[16];
// Bytes 7550-755f
uint8_t intro_line2[16];
} intro_text_t;
//
// Table of text messages.
//
typedef struct {
uint8_t count; // number of messages
uint8_t _unused1[7]; // 0
uint8_t len[NMESSAGES]; // message length
uint8_t _unused2[NMESSAGES]; // 0
uint8_t message[NMESSAGES*144]; // messages
} msgtab_t;
static const char *POWER_NAME[] = { "Low", "High" };
static const char *BANDWIDTH[] = { "12.5", "25" };
static const char *CONTACT_TYPE[] = {"Group", "Private", "All", "???" };
static const char *ADMIT_NAME[] = { "-", "Free", "Color", "???" };
#ifdef PRINT_RARE_PARAMS
static const char *PRIVACY_NAME[] = { "-", "On" };
static const char *SIGNALING_SYSTEM[] = { "-", "DTMF" };
#endif
//
// Print a generic information about the device.
//
static void rd5r_print_version(radio_device_t *radio, FILE *out)
{
unsigned char *timestamp = GET_TIMESTAMP();
if (*timestamp != 0xff) {
fprintf(out, "Last Programmed Date: %d%d%d%d-%d%d-%d%d",
timestamp[0] >> 4, timestamp[0] & 15, timestamp[1] >> 4, timestamp[1] & 15,
timestamp[2] >> 4, timestamp[2] & 15, timestamp[3] >> 4, timestamp[3] & 15);
fprintf(out, " %d%d:%d%d\n",
timestamp[4] >> 4, timestamp[4] & 15, timestamp[5] >> 4, timestamp[5] & 15);
}
}
//
// Read memory image from the device.
//
static void download(radio_device_t *radio)
{
int bno;
// Read range 0x80...0x1e29f.
for (bno=1; bno<966; bno++) {
if (bno >= 248 && bno < 256) {
// Skip range 0x7c00...0x8000.
continue;
}
hid_read_block(bno, &radio_mem[bno*128], 128);
++radio_progress;
if (radio_progress % 32 == 0) {
fprintf(stderr, "#");
fflush(stderr);
}
}
//hid_read_finish();
// Clear header and footer.
memset(&radio_mem[0], 0xff, 128);
memset(&radio_mem[966*128], 0xff, MEMSZ - 966*128);
memset(&radio_mem[248*128], 0xff, 8*128);
}
//
// Baofeng RD-5R: read memory image.
//
static void rd5r_download(radio_device_t *radio)
{
download(radio);
// Add header.
memcpy(&radio_mem[0], "BF-5R", 5);
}
//
// Write memory image to the device.
//
static void rd5r_upload(radio_device_t *radio, int cont_flag)
{
int bno;
// Write range 0x80...0x1e29f.
for (bno=1; bno<966; bno++) {
if (bno >= 248 && bno < 256) {
// Skip range 0x7c00...0x8000.
continue;
}
hid_write_block(bno, &radio_mem[bno*128], 128);
++radio_progress;
if (radio_progress % 32 == 0) {
fprintf(stderr, "#");
fflush(stderr);
}
}
hid_write_finish();
}
//
// Check whether the memory image is compatible with this device.
//
static int rd5r_is_compatible(radio_device_t *radio)
{
return strncmp("BF-5R", (char*)&radio_mem[0], 5) == 0;
}
//
// Set name for a given zone.
//
static void setup_zone(int index, const char *name)
{
zonetab_t *zt = GET_ZONETAB();
zone_t *z = &zt->zone[index];
ascii_decode(z->name, name, sizeof(z->name));
memset(z->member, 0, sizeof(z->member));
// Set valid bit.
zt->bitmap[index / 8] |= 1 << (index & 7);
}
//
// Get zone by index.
// Return 0 when zone is disabled.
//
static zone_t *get_zone(int index)
{
zonetab_t *zt = GET_ZONETAB();
if (zt->bitmap[index / 8] >> (index & 7) & 1)
return &zt->zone[index];
else
return 0;
}
//
// Add channel to a zone.
// Return 0 on failure.
//
static int zone_append(int index, int cnum)
{
zonetab_t *zt = GET_ZONETAB();
zone_t *z = &zt->zone[index];
int i;
for (i=0; i<16; i++) {
if (z->member[i] == cnum)
return 1;
if (z->member[i] == 0) {
z->member[i] = cnum;
return 1;
}
}
return 0;
}
static void erase_zone(int index)
{
zonetab_t *zt = GET_ZONETAB();
zone_t *z = &zt->zone[index];
memset(z->name, 0, sizeof(z->name));
memset(z->member, 0, sizeof(z->member));
// Clear valid bit.
zt->bitmap[index / 8] &= ~(1 << (index & 7));
}
//
// Set parameters for a given scan list.
//
static void setup_scanlist(int index, const char *name,
int prio1, int prio2, int txchan)
{
scantab_t *st = GET_SCANTAB();
scanlist_t *sl = &st->scanlist[index];
memset(sl, 0, 88);
ascii_decode(sl->name, name, sizeof(sl->name));
sl->priority_ch1 = prio1;
sl->priority_ch2 = prio2;
sl->tx_designated_ch = txchan;
sl->talkback = 1;
sl->channel_mark = 1;
sl->pl_type = PL_PRI_NONPRI;
sl->sign_hold_time = 1000 / 25; // 1 sec
sl->prio_sample_time = 2000 / 250; // 2 sec
// Set valid bit.
st->valid[index] = 1;
}
static void erase_scanlist(int index)
{
scantab_t *st = GET_SCANTAB();
memset(&st->scanlist[index], 0xff, sizeof(scanlist_t));
// Clear valid bit.
st->valid[index] = 0;
}
//
// Get scanlist by index.
// Return 0 when scanlist is disabled.
//
static scanlist_t *get_scanlist(int index)
{
scantab_t *st = GET_SCANTAB();
if (st->valid[index])
return &st->scanlist[index];
else
return 0;
}
//
// Add channel to a zone.
// Return 0 on failure.
//
static int scanlist_append(int index, int cnum)
{
scanlist_t *sl = get_scanlist(index);
int i;
if (!sl)
return 0;
// First element is always Selected.
if (sl->member[0] == 0)
sl->member[0] = CHAN_SELECTED;
for (i=0; i<32; i++) {
if (sl->member[i] == cnum + 1)
return 1;
if (sl->member[i] == 0) {
sl->member[i] = cnum + 1;
return 1;
}
}
return 0;
}
static void erase_contact(int index)
{
contact_t *ct = GET_CONTACT(index);
memset(ct->name, 0xff, sizeof(ct->name));
memset(ct->id, 0, 8);
}
static void setup_contact(int index, const char *name, int type, int id, int rxtone)
{
contact_t *ct = GET_CONTACT(index);
ct->id[0] = ((id / 10000000) << 4) | ((id / 1000000) % 10);
ct->id[1] = ((id / 100000 % 10) << 4) | ((id / 10000) % 10);
ct->id[2] = ((id / 1000 % 10) << 4) | ((id / 100) % 10);
ct->id[3] = ((id / 10 % 10) << 4) | (id % 10);
ct->type = type;
ct->receive_tone = rxtone;
ct->ring_style = 0; // TODO
ct->_unused23 = (type < CALL_ALL) ? 0 : 0xff;
ascii_decode(ct->name, name, 16);
}
//
// Get grouplist by index.
// Return 0 when grouplist is disabled.
//
static grouplist_t *get_grouplist(int index)
{
grouptab_t *gt = GET_GROUPTAB();
if (gt->nitems1[index] > 0)
return &gt->grouplist[index];
else
return 0;
}
static void setup_grouplist(int index, const char *name)
{
grouptab_t *gt = GET_GROUPTAB();
grouplist_t *gl = &gt->grouplist[index];
ascii_decode(gl->name, name, sizeof(gl->name));
// Enable grouplist.
gt->nitems1[index] = 1;
}
//
// Add contact to a grouplist.
// Return 0 on failure.
//
static int grouplist_append(int index, int cnum)
{
grouptab_t *gt = GET_GROUPTAB();
grouplist_t *gl = &gt->grouplist[index];
int i;
// RD-5R firmware up to v2.1.6 has a bug:
// when all 16 entries in RX group list are occupied,
// it stops functioning and no audio is received.
// As a workaround, we must use only 15 entries here.
for (i=0; i<15; i++) {
if (gl->member[i] == cnum)
return 1;
if (gl->member[i] == 0) {
gl->member[i] = cnum;
gt->nitems1[index] = i + 2;
return 1;
}
}
return 0;
}
//
// Set text for a given message.
//
static void setup_message(int index, const char *text)
{
msgtab_t *mt = GET_MSGTAB();
uint8_t *msg = &mt->message[index*144];
int len, i;
// Skip spaces and tabs.
while (*text == ' ' || *text == '\t')
text++;
len = strlen(text);
mt->len[index] = len + 1;
memset(msg, 0xff, 144);
memcpy(msg, text, len < 144 ? len : 144);
// Count messages.
mt->count = 0;
for (i=0; i<sizeof(mt->len); i++)
if (mt->len[i] > 0)
mt->count++;
}
//
// Check that the radio does support this frequency.
//
static int is_valid_frequency(int mhz)
{
if (mhz >= 136 && mhz <= 174)
return 1;
if (mhz >= 400 && mhz <= 480)
return 1;
return 0;
}
//
// Get channel bank by index.
//
static bank_t *get_bank(int i)
{
if (i == 0)
return (bank_t*) &radio_mem[OFFSET_BANK_0];
else
return (i - 1) + (bank_t*) &radio_mem[OFFSET_BANK_1];
}
//
// Get channel by index.
//
static channel_t *get_channel(int i)
{
bank_t *b = get_bank(i >> 7);
if ((b->bitmap[i % 128 / 8] >> (i & 7)) & 1)
return &b->chan[i % 128];
else
return 0;
}
//
// Set the parameters for a given memory channel.
//
static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_mhz,
int power, int scanlist, int squelch, int tot, int rxonly,
int admit, int colorcode, int timeslot, int grouplist, int contact,
int rxtone, int txtone, int width)
{
bank_t *b = get_bank(i >> 7);
channel_t *ch = &b->chan[i % 128];
ch->channel_mode = mode;
ch->bandwidth = width;
ch->squelch = squelch;
ch->rx_only = rxonly;
ch->repeater_slot2 = (timeslot == 2);
ch->colorcode_tx = colorcode;
ch->colorcode_rx = colorcode;
// ch->data_call_conf = 1; // Always ask for SMS acknowledge
ch->power = power;
ch->admit_criteria = admit;
ch->contact_name_index = contact;
ch->tot = tot;
ch->scan_list_index = scanlist;
ch->group_list_index = grouplist;
ch->rx_frequency = mhz_to_bcd(rx_mhz);
ch->tx_frequency = mhz_to_bcd(tx_mhz);
ch->ctcss_dcs_receive = rxtone;
ch->ctcss_dcs_transmit = txtone;
ascii_decode(ch->name, name, sizeof(ch->name));
// Set valid bit.
b->bitmap[i % 128 / 8] |= 1 << (i & 7);
}
//
// Erase the channel record.
//
static void erase_channel(int i)
{
bank_t *b = get_bank(i >> 7);
channel_t *ch = &b->chan[i % 128];
// Bytes 0-15
memset(ch->name, 0xff, sizeof(ch->name));
// Bytes 16-23
ch->rx_frequency = 0x40000000;
ch->tx_frequency = 0x40000000;
// Byte 24
ch->channel_mode = MODE_ANALOG;
// Bytes 25-26
ch->_unused25[0] = 0;
ch->_unused25[1] = 0;
// Bytes 27-28
ch->tot = 0;
ch->tot_rekey_delay = 5;
// Byte 29
ch->admit_criteria = ADMIT_ALWAYS;
// Bytes 30-31
ch->_unused30 = 0x50;
ch->scan_list_index = 0;
// Bytes 32-35
ch->ctcss_dcs_receive = 0xffff;
ch->ctcss_dcs_transmit = 0xffff;
// Bytes 36-39
ch->_unused36 = 0;
ch->tx_signaling_syst = 0;
ch->_unused38 = 0;
ch->rx_signaling_syst = 0;
// Bytes 40-43
ch->_unused40 = 0x16;
ch->privacy_group = PRIVGR_NONE;
ch->colorcode_tx = 1;
ch->group_list_index = 0;
// Bytes 44-47
ch->colorcode_rx = 1;
ch->emergency_system_index = 0;
ch->contact_name_index = 0;
// Byte 48
ch->_unused48 = 0;
ch->emergency_alarm_ack = 0;
ch->data_call_conf = 0;
// Byte 49
ch->private_call_conf = 0;
ch->_unused49_1 = 0;
ch->privacy = 0;
ch->_unused49_5 = 0;
ch->repeater_slot2 = 0;
ch->_unused49_7 = 0;
// Byte 50
ch->dcdm = 0;
ch->_unused50_1 = 0;
ch->non_ste_frequency = 0;
ch->_unused50_6 = 0;
// Byte 51
ch->_unused51_0 = 0;
ch->bandwidth = BW_25_KHZ;
ch->rx_only = 0;
ch->talkaround = 0;
ch->_unused51_4 = 0;
ch->vox = 0;
ch->power = POWER_HIGH;
// Bytes 52-55
ch->_unused52[0] = 0;
ch->_unused52[1] = 0;
ch->_unused52[2] = 0;
ch->squelch = 5;
// Clear valid bit.
b->bitmap[i % 128 / 8] &= ~(1 << (i & 7));
}
static void print_chanlist(FILE *out, uint16_t *unsorted, int nchan, int scanlist_flag)
{
int last = -1;
int range = 0;
int n;
uint16_t data[nchan];
#define CNUM(n) (scanlist_flag ? n-1 : n)
// Sort the list before printing.
memcpy(data, unsorted, nchan * sizeof(uint16_t));
qsort(data, nchan, sizeof(uint16_t), compare_index);
for (n=0; n<nchan; n++) {
int item = data[n];
if (item == 0)
break;
if (item == last+1) {
range = 1;
} else {
if (range) {
fprintf(out, "-%d", CNUM(last));
range = 0;
}
if (n > 0)
fprintf(out, ",");
fprintf(out, "%d", CNUM(item));
}
last = item;
}
if (range)
fprintf(out, "-%d", CNUM(last));
}
static void print_id(FILE *out, int verbose)
{
general_settings_t *gs = GET_SETTINGS();
unsigned id = GET_ID(gs->radio_id);
if (verbose)
fprintf(out, "\n# Unique DMR ID and name of this radio.");
fprintf(out, "\nID: %u\nName: ", id);
if (VALID_TEXT(gs->radio_name)) {
print_ascii(out, gs->radio_name, 8, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
static void print_intro(FILE *out, int verbose)
{
intro_text_t *it = GET_INTRO();
if (verbose)
fprintf(out, "\n# Text displayed when the radio powers up.\n");
fprintf(out, "Intro Line 1: ");
if (VALID_TEXT(it->intro_line1)) {
print_ascii(out, it->intro_line1, 16, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\nIntro Line 2: ");
if (VALID_TEXT(it->intro_line2)) {
print_ascii(out, it->intro_line2, 16, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
//
// Do we have any channels of given mode?
//
static int have_channels(int mode)
{
int i;
for (i=0; i<NCHAN; i++) {
channel_t *ch = get_channel(i);
if (ch && ch->channel_mode == mode)
return 1;
}
return 0;
}
//
// Print base parameters of the channel:
// Name
// RX Frequency
// TX Frequency
// Power
// Scan List
// TOT
// RX Only
// Admit Criteria
//
static void print_chan_base(FILE *out, channel_t *ch, int cnum)
{
fprintf(out, "%5d ", cnum);
print_ascii(out, ch->name, 16, 1);
fprintf(out, " ");
print_freq(out, ch->rx_frequency);
fprintf(out, " ");
print_offset(out, ch->rx_frequency, ch->tx_frequency);
fprintf(out, "%-4s ", POWER_NAME[ch->power]);
if (ch->scan_list_index == 0)
fprintf(out, "- ");
else
fprintf(out, "%-4d ", ch->scan_list_index);
if (ch->tot == 0)
fprintf(out, "- ");
else
fprintf(out, "%-3d ", ch->tot * 15);
fprintf(out, "%c ", "-+"[ch->rx_only]);
if (ch->channel_mode == MODE_DIGITAL)
fprintf(out, "%-6s ", ADMIT_NAME[ch->admit_criteria & 3]);
else
fprintf(out, "%-6s ", ADMIT_NAME[ch->admit_criteria != 0]);
}
#ifdef PRINT_RARE_PARAMS
//
// Print extended parameters of the channel:
// TOT Rekey Delay
// RX Ref Frequency
// RX Ref Frequency
// Lone Worker
// VOX
//
static void print_chan_ext(FILE *out, channel_t *ch)
{
fprintf(out, "%-3d ", ch->tot_rekey_delay);
fprintf(out, "%c ", "-+"[ch->vox]);
fprintf(out, "%c ", "-+"[ch->talkaround]);
}
#endif
static void print_digital_channels(FILE *out, int verbose)
{
int i;
if (verbose) {
fprintf(out, "# Table of digital channels.\n");
fprintf(out, "# 1) Channel number: 1-%d\n", NCHAN);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Receive frequency in MHz\n");
fprintf(out, "# 4) Transmit frequency or +/- offset in MHz\n");
fprintf(out, "# 5) Transmit power: High, Low\n");
fprintf(out, "# 6) Scan list: - or index in Scanlist table\n");
fprintf(out, "# 7) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
fprintf(out, "# 8) Receive only: -, +\n");
fprintf(out, "# 9) Admit criteria: -, Free, Color\n");
fprintf(out, "# 10) Color code: 0, 1, 2, 3... 15\n");
fprintf(out, "# 11) Time slot: 1 or 2\n");
fprintf(out, "# 12) Receive group list: - or index in Grouplist table\n");
fprintf(out, "# 13) Contact for transmit: - or index in Contacts table\n");
fprintf(out, "#\n");
}
fprintf(out, "Digital Name Receive Transmit Power Scan TOT RO Admit Color Slot RxGL TxContact");
#ifdef PRINT_RARE_PARAMS
fprintf(out, " Dly VOX TA EmSys Privacy PN PCC EAA DCC");
#endif
fprintf(out, "\n");
for (i=0; i<NCHAN; i++) {
channel_t *ch = get_channel(i);
if (!ch) {
continue;
}
if (ch->channel_mode != MODE_DIGITAL) {
// Select digital channels
continue;
}
print_chan_base(out, ch, i+1);
// Print digital parameters of the channel:
// Color Code
// Repeater Slot
// Group List
// Contact Name
fprintf(out, "%-5d %-3d ", ch->colorcode_tx, ch->repeater_slot2 + 1);
if (ch->group_list_index == 0)
fprintf(out, "- ");
else
fprintf(out, "%-4d ", ch->group_list_index);
if (ch->contact_name_index == 0)
fprintf(out, "-");
else
fprintf(out, "%-4d", ch->contact_name_index);
#ifdef PRINT_RARE_PARAMS
print_chan_ext(out, ch);
// Extended digital parameters of the channel:
// Emergency System
// Privacy
// Privacy Group
// Private Call Confirmed
// Emergency Alarm Ack
// Data Call Confirmed
// DCDM switch (inverted)
// Leader/MS
if (ch->emergency_system_index == 0)
fprintf(out, "- ");
else
fprintf(out, "%-5d ", ch->emergency_system_index);
fprintf(out, "%-8s ", PRIVACY_NAME[ch->privacy]);
if (ch->privacy == 0)
fprintf(out, "- ");
else
fprintf(out, "%-2d ", ch->privacy_group);
fprintf(out, "%c ", "-+"[ch->private_call_conf]);
fprintf(out, "%c ", "-+"[ch->emergency_alarm_ack]);
fprintf(out, "%c ", "-+"[ch->data_call_conf]);
#endif
// Print contact name as a comment.
if (ch->contact_name_index > 0) {
contact_t *ct = GET_CONTACT(ch->contact_name_index - 1);
if (VALID_CONTACT(ct)) {
fprintf(out, " # ");
print_ascii(out, ct->name, 16, 0);
}
}
fprintf(out, "\n");
}
}
static void print_analog_channels(FILE *out, int verbose)
{
int i;
if (verbose) {
fprintf(out, "# Table of analog channels.\n");
fprintf(out, "# 1) Channel number: 1-%d\n", NCHAN);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Receive frequency in MHz\n");
fprintf(out, "# 4) Transmit frequency or +/- offset in MHz\n");
fprintf(out, "# 5) Transmit power: High, Low\n");
fprintf(out, "# 6) Scan list: - or index\n");
fprintf(out, "# 7) Transmit timeout timer in seconds: 0, 15, 30, 45... 555\n");
fprintf(out, "# 8) Receive only: -, +\n");
fprintf(out, "# 9) Admit criteria: -, Free, Tone\n");
fprintf(out, "# 10) Squelch level: Normal, Tight\n");
fprintf(out, "# 11) Guard tone for receive, or '-' to disable\n");
fprintf(out, "# 12) Guard tone for transmit, or '-' to disable\n");
fprintf(out, "# 13) Bandwidth in kHz: 12.5, 20, 25\n");
fprintf(out, "#\n");
}
fprintf(out, "Analog Name Receive Transmit Power Scan TOT RO Admit Squelch RxTone TxTone Width");
#ifdef PRINT_RARE_PARAMS
fprintf(out, " Dly RxRef TxRef LW VOX TA RxSign TxSign");
#endif
fprintf(out, "\n");
for (i=0; i<NCHAN; i++) {
channel_t *ch = get_channel(i);
if (!ch) {
continue;
}
if (ch->channel_mode != MODE_ANALOG) {
// Select analog channels
continue;
}
print_chan_base(out, ch, i+1);
// Print analog parameters of the channel:
// Squelch
// CTCSS/DCS Dec
// CTCSS/DCS Enc
// Bandwidth
fprintf(out, "%-7d ", ch->squelch <= 9 ? ch->squelch : 5);
print_tone(out, ch->ctcss_dcs_receive);
fprintf(out, " ");
print_tone(out, ch->ctcss_dcs_transmit);
fprintf(out, " %s", BANDWIDTH[ch->bandwidth]);
#ifdef PRINT_RARE_PARAMS
print_chan_ext(out, ch);
// Extended analog parameters of the channel:
// Rx Signaling System
// Tx Signaling System
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->rx_signaling_syst & 1]);
fprintf(out, "%-6s ", SIGNALING_SYSTEM[ch->tx_signaling_syst & 1]);
#endif
fprintf(out, "\n");
}
}
static int have_zones()
{
zonetab_t *zt = GET_ZONETAB();
int i;
for (i=0; i<32; i++) {
if (zt->bitmap[i])
return 1;
}
return 0;
}
static int have_scanlists()
{
scantab_t *st = GET_SCANTAB();
int i;
for (i=0; i<NSCANL; i++) {
if (st->valid[i])
return 1;
}
return 0;
}
static int have_contacts()
{
int i;
for (i=0; i<NCONTACTS; i++) {
contact_t *ct = GET_CONTACT(i);
if (VALID_CONTACT(ct))
return 1;
}
return 0;
}
static int have_grouplists()
{
grouptab_t *gt = GET_GROUPTAB();
int i;
for (i=0; i<NGLISTS; i++) {
if (gt->nitems1[i] > 0)
return 1;
}
return 0;
}
static int have_messages()
{
msgtab_t *mt = GET_MSGTAB();
return mt->count > 0;
}
//
// Print full information about the device configuration.
//
static void rd5r_print_config(radio_device_t *radio, FILE *out, int verbose)
{
int i;
fprintf(out, "Radio: %s\n", radio->name);
if (verbose)
rd5r_print_version(radio, out);
//
// Channels.
//
if (have_channels(MODE_DIGITAL)) {
fprintf(out, "\n");
print_digital_channels(out, verbose);
}
if (have_channels(MODE_ANALOG)) {
fprintf(out, "\n");
print_analog_channels(out, verbose);
}
//
// Zones.
//
if (have_zones()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of channel zones.\n");
fprintf(out, "# 1) Zone number: 1-%d\n", NZONES);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) List of channels: numbers and ranges (N-M) separated by comma\n");
fprintf(out, "#\n");
}
fprintf(out, "Zone Name Channels\n");
for (i=0; i<NZONES; i++) {
zone_t *z = get_zone(i);
if (!z) {
// Zone is disabled.
continue;
}
fprintf(out, "%4d ", i + 1);
print_ascii(out, z->name, 16, 1);
fprintf(out, " ");
if (z->member[0]) {
print_chanlist(out, z->member, 16, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
}
//
// Scan lists.
//
if (have_scanlists()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of scan lists.\n");
fprintf(out, "# 1) Scan list number: 1-%d\n", NSCANL);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Priority channel 1 (50%% of scans): -, Sel or index\n");
fprintf(out, "# 4) Priority channel 2 (25%% of scans): -, Sel or index\n");
fprintf(out, "# 5) Designated transmit channel: Last, Sel or index\n");
fprintf(out, "# 6) List of channels: numbers and ranges (N-M) separated by comma\n");
fprintf(out, "#\n");
}
fprintf(out, "Scanlist Name PCh1 PCh2 TxCh ");
#ifdef PRINT_RARE_PARAMS
fprintf(out, "Hold Smpl ");
#endif
fprintf(out, "Channels\n");
for (i=0; i<NSCANL; i++) {
scanlist_t *sl = get_scanlist(i);
if (!sl) {
// Scan list is disabled.
continue;
}
fprintf(out, "%5d ", i + 1);
print_ascii(out, sl->name, 15, 1);
if (sl->priority_ch1 == 0) {
fprintf(out, " - ");
} else if (sl->priority_ch1 == 1) {
fprintf(out, " Sel ");
} else {
fprintf(out, " %-4d ", sl->priority_ch1 - 1);
}
if (sl->priority_ch2 == 0) {
fprintf(out, "- ");
} else if (sl->priority_ch2 == 1) {
fprintf(out, "Sel ");
} else {
fprintf(out, "%-4d ", sl->priority_ch2 - 1);
}
if (sl->tx_designated_ch == 0) {
fprintf(out, "Last ");
} else if (sl->tx_designated_ch == 1) {
fprintf(out, "Sel ");
} else {
fprintf(out, "%-4d ", sl->tx_designated_ch - 1);
}
#ifdef PRINT_RARE_PARAMS
fprintf(out, "%-4d %-4d ",
sl->sign_hold_time * 25, sl->prio_sample_time * 250);
#endif
if (sl->member[1]) {
print_chanlist(out, sl->member + 1, 31, 1);
} else {
fprintf(out, "Sel");
}
fprintf(out, "\n");
}
}
//
// Contacts.
//
if (have_contacts()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of contacts.\n");
fprintf(out, "# 1) Contact number: 1-%d\n", NCONTACTS);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) Call type: Group, Private, All\n");
fprintf(out, "# 4) Call ID: 1...16777215\n");
fprintf(out, "# 5) Call receive tone: -, +\n");
fprintf(out, "#\n");
}
fprintf(out, "Contact Name Type ID RxTone\n");
for (i=0; i<NCONTACTS; i++) {
contact_t *ct = GET_CONTACT(i);
if (!VALID_CONTACT(ct)) {
// Contact is disabled
continue;
}
fprintf(out, "%5d ", i+1);
print_ascii(out, ct->name, 16, 1);
fprintf(out, " %-7s %-8d %s\n",
CONTACT_TYPE[ct->type & 3], CONTACT_ID(ct), ct->receive_tone ? "+" : "-");
}
}
//
// Group lists.
//
if (have_grouplists()) {
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of group lists.\n");
fprintf(out, "# 1) Group list number: 1-%d\n", NGLISTS);
fprintf(out, "# 2) Name: up to 16 characters, use '_' instead of space\n");
fprintf(out, "# 3) List of contacts: numbers and ranges (N-M) separated by comma\n");
fprintf(out, "#\n");
}
fprintf(out, "Grouplist Name Contacts\n");
for (i=0; i<NGLISTS; i++) {
grouplist_t *gl = get_grouplist(i);
if (!gl) {
// Group list is disabled.
continue;
}
fprintf(out, "%5d ", i + 1);
print_ascii(out, gl->name, 16, 1);
fprintf(out, " ");
if (gl->member[0]) {
print_chanlist(out, gl->member, 16, 0);
} else {
fprintf(out, "-");
}
fprintf(out, "\n");
}
}
//
// Text messages.
//
if (have_messages()) {
msgtab_t *mt = GET_MSGTAB();
fprintf(out, "\n");
if (verbose) {
fprintf(out, "# Table of text messages.\n");
fprintf(out, "# 1) Message number: 1-%d\n", NMESSAGES);
fprintf(out, "# 2) Text: up to 144 characters\n");
fprintf(out, "#\n");
}
fprintf(out, "Message Text\n");
for (i=0; i<NMESSAGES; i++) {
if (mt->len[i] == 0) {
// Message is disabled
continue;
}
fprintf(out, "%5d ", i+1);
print_ascii(out, &mt->message[i*144], 144, 0);
fprintf(out, "\n");
}
}
// General settings.
print_id(out, verbose);
print_intro(out, verbose);
}
//
// Read memory image from the binary file.
//
static void rd5r_read_image(radio_device_t *radio, FILE *img)
{
struct stat st;
// Guess device type by file size.
if (fstat(fileno(img), &st) < 0) {
fprintf(stderr, "Cannot get file size.\n");
exit(-1);
}
switch (st.st_size) {
case MEMSZ:
// IMG file.
if (fread(&radio_mem[0], 1, MEMSZ, img) != MEMSZ) {
fprintf(stderr, "Error reading image data.\n");
exit(-1);
}
break;
default:
fprintf(stderr, "Unrecognized file size %u bytes.\n", (int) st.st_size);
exit(-1);
}
}
//
// Save memory image to the binary file.
//
static void rd5r_save_image(radio_device_t *radio, FILE *img)
{
fwrite(&radio_mem[0], 1, MEMSZ, img);
}
//
// Erase all channels.
//
static void erase_channels()
{
int i;
for (i=0; i<NCHAN; i++) {
erase_channel(i);
}
}
//
// Erase all zones.
//
static void erase_zones()
{
int i;
for (i=0; i<NZONES; i++) {
erase_zone(i);
}
}
//
// Erase all scanlists.
//
static void erase_scanlists()
{
int i;
for (i=0; i<NSCANL; i++) {
erase_scanlist(i);
}
}
//
// Erase all contacts.
//
static void erase_contacts()
{
int i;
for (i=0; i<NCONTACTS; i++) {
erase_contact(i);
}
}
//
// Parse the scalar parameter.
//
static void rd5r_parse_parameter(radio_device_t *radio, char *param, char *value)
{
if (strcasecmp("Radio", param) == 0) {
if (!radio_is_compatible(value)) {
fprintf(stderr, "Incompatible model: %s\n", value);
exit(-1);
}
return;
}
general_settings_t *gs = GET_SETTINGS();
if (strcasecmp ("Name", param) == 0) {
ascii_decode(gs->radio_name, value, 8);
return;
}
if (strcasecmp ("ID", param) == 0) {
uint32_t id = strtoul(value, 0, 0);
gs->radio_id[0] = ((id / 10000000) << 4) | ((id / 1000000) % 10);
gs->radio_id[1] = ((id / 100000 % 10) << 4) | ((id / 10000) % 10);
gs->radio_id[2] = ((id / 1000 % 10) << 4) | ((id / 100) % 10);
gs->radio_id[3] = ((id / 10 % 10) << 4) | (id % 10);
return;
}
if (strcasecmp ("Last Programmed Date", param) == 0) {
// Ignore.
return;
}
if (strcasecmp ("CPS Software Version", param) == 0) {
// Ignore.
return;
}
intro_text_t *it = GET_INTRO();
if (strcasecmp ("Intro Line 1", param) == 0) {
ascii_decode(it->intro_line1, value, 16);
return;
}
if (strcasecmp ("Intro Line 2", param) == 0) {
ascii_decode(it->intro_line2, value, 16);
return;
}
fprintf(stderr, "Unknown parameter: %s = %s\n", param, value);
exit(-1);
}
//
// Parse one line of Digital channel table.
// Start_flag is 1 for the first table row.
// Return 0 on failure.
//
static int parse_digital_channel(radio_device_t *radio, int first_row, char *line)
{
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
char power_str[256], scanlist_str[256];
char tot_str[256], rxonly_str[256], admit_str[256], colorcode_str[256];
char slot_str[256], grouplist_str[256], contact_str[256];
int num, power, scanlist, tot, rxonly, admit;
int colorcode, timeslot, grouplist, contact;
double rx_mhz, tx_mhz;
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s",
num_str, name_str, rxfreq_str, offset_str,
power_str, scanlist_str,
tot_str, rxonly_str, admit_str, colorcode_str,
slot_str, grouplist_str, contact_str) != 13)
return 0;
num = atoi(num_str);
if (num < 1 || num > NCHAN) {
fprintf(stderr, "Bad channel number.\n");
return 0;
}
if (sscanf(rxfreq_str, "%lf", &rx_mhz) != 1 ||
!is_valid_frequency(rx_mhz)) {
fprintf(stderr, "Bad receive frequency.\n");
return 0;
}
if (sscanf(offset_str, "%lf", &tx_mhz) != 1) {
badtx: fprintf(stderr, "Bad transmit frequency.\n");
return 0;
}
if (offset_str[0] == '-' || offset_str[0] == '+')
tx_mhz += rx_mhz;
if (! is_valid_frequency(tx_mhz))
goto badtx;
if (strcasecmp("High", power_str) == 0) {
power = POWER_HIGH;
} else if (strcasecmp("Low", power_str) == 0) {
power = POWER_LOW;
} else {
fprintf(stderr, "Bad power level.\n");
return 0;
}
if (*scanlist_str == '-') {
scanlist = 0;
} else {
scanlist = atoi(scanlist_str);
if (scanlist == 0 || scanlist > NSCANL) {
fprintf(stderr, "Bad scanlist.\n");
return 0;
}
}
tot = atoi(tot_str);
if (tot > 555 || tot % 15 != 0) {
fprintf(stderr, "Bad timeout timer.\n");
return 0;
}
tot /= 15;
if (*rxonly_str == '-') {
rxonly = 0;
} else if (*rxonly_str == '+') {
rxonly = 1;
} else {
fprintf(stderr, "Bad receive only flag.\n");
return 0;
}
if (*admit_str == '-' || strcasecmp("Always", admit_str) == 0) {
admit = ADMIT_ALWAYS;
} else if (strcasecmp("Free", admit_str) == 0) {
admit = ADMIT_CH_FREE;
} else if (strcasecmp("Color", admit_str) == 0) {
admit = ADMIT_COLOR;
} else {
fprintf(stderr, "Bad admit criteria.\n");
return 0;
}
colorcode = atoi(colorcode_str);
if (colorcode < 0 || colorcode > 15) {
fprintf(stderr, "Bad color code.\n");
return 0;
}
timeslot = atoi(slot_str);
if (timeslot < 1 || timeslot > 2) {
fprintf(stderr, "Bad timeslot.\n");
return 0;
}
if (*grouplist_str == '-') {
grouplist = 0;
} else {
grouplist = atoi(grouplist_str);
if (grouplist == 0 || grouplist > NGLISTS) {
fprintf(stderr, "Bad receive grouplist.\n");
return 0;
}
}
if (*contact_str == '-') {
contact = 0;
} else {
contact = atoi(contact_str);
if (contact == 0 || contact > NCONTACTS) {
fprintf(stderr, "Bad transmit contact.\n");
return 0;
}
}
if (first_row && radio->channel_count == 0) {
// On first entry, erase all channels, zones and scanlists.
erase_channels();
erase_zones();
erase_scanlists();
}
setup_channel(num-1, MODE_DIGITAL, name_str, rx_mhz, tx_mhz,
power, scanlist, 5, tot, rxonly, admit,
colorcode, timeslot, grouplist, contact, 0xffff, 0xffff, BW_12_5_KHZ);
radio->channel_count++;
return 1;
}
//
// Parse one line of Analog channel table.
// Start_flag is 1 for the first table row.
// Return 0 on failure.
//
static int parse_analog_channel(radio_device_t *radio, int first_row, char *line)
{
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
char power_str[256], scanlist_str[256], squelch_str[256];
char tot_str[256], rxonly_str[256], admit_str[256];
char rxtone_str[256], txtone_str[256], width_str[256];
int num, power, scanlist, squelch, tot, rxonly, admit;
int rxtone, txtone, width;
double rx_mhz, tx_mhz;
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s",
num_str, name_str, rxfreq_str, offset_str,
power_str, scanlist_str,
tot_str, rxonly_str, admit_str, squelch_str,
rxtone_str, txtone_str, width_str) != 13)
return 0;
num = atoi(num_str);
if (num < 1 || num > NCHAN) {
fprintf(stderr, "Bad channel number.\n");
return 0;
}
if (sscanf(rxfreq_str, "%lf", &rx_mhz) != 1 ||
!is_valid_frequency(rx_mhz)) {
fprintf(stderr, "Bad receive frequency.\n");
return 0;
}
if (sscanf(offset_str, "%lf", &tx_mhz) != 1) {
badtx: fprintf(stderr, "Bad transmit frequency.\n");
return 0;
}
if (offset_str[0] == '-' || offset_str[0] == '+')
tx_mhz += rx_mhz;
if (! is_valid_frequency(tx_mhz))
goto badtx;
if (strcasecmp("High", power_str) == 0) {
power = POWER_HIGH;
} else if (strcasecmp("Low", power_str) == 0) {
power = POWER_LOW;
} else {
fprintf(stderr, "Bad power level.\n");
return 0;
}
if (*scanlist_str == '-') {
scanlist = 0;
} else {
scanlist = atoi(scanlist_str);
if (scanlist == 0 || scanlist > NSCANL) {
fprintf(stderr, "Bad scanlist.\n");
return 0;
}
}
squelch = atoi(squelch_str);
if (squelch < 0 || squelch > 9) {
fprintf(stderr, "Bad squelch level.\n");
return 0;
}
tot = atoi(tot_str);
if (tot > 555 || tot % 15 != 0) {
fprintf(stderr, "Bad timeout timer.\n");
return 0;
}
tot /= 15;
if (*rxonly_str == '-') {
rxonly = 0;
} else if (*rxonly_str == '+') {
rxonly = 1;
} else {
fprintf(stderr, "Bad receive only flag.\n");
return 0;
}
if (*admit_str == '-' || strcasecmp("Always", admit_str) == 0) {
admit = ADMIT_ALWAYS;
} else if (strcasecmp("Free", admit_str) == 0) {
admit = ADMIT_CH_FREE;
} else {
fprintf(stderr, "Bad admit criteria.\n");
return 0;
}
rxtone = encode_tone(rxtone_str);
if (rxtone < 0) {
fprintf(stderr, "Bad receive tone.\n");
return 0;
}
txtone = encode_tone(txtone_str);
if (txtone < 0) {
fprintf(stderr, "Bad transmit tone.\n");
return 0;
}
if (strcasecmp ("12.5", width_str) == 0) {
width = BW_12_5_KHZ;
} else if (strcasecmp ("25", width_str) == 0) {
width = BW_25_KHZ;
} else {
fprintf (stderr, "Bad width.\n");
return 0;
}
if (first_row && radio->channel_count == 0) {
// On first entry, erase all channels, zones and scanlists.
erase_channels();
erase_zones();
erase_scanlists();
}
setup_channel(num-1, MODE_ANALOG, name_str, rx_mhz, tx_mhz,
power, scanlist, squelch, tot, rxonly, admit,
0, 1, 0, 0, rxtone, txtone, width);
radio->channel_count++;
return 1;
}
//
// Parse one line of Zones table.
// Return 0 on failure.
//
static int parse_zones(int first_row, char *line)
{
char num_str[256], name_str[256], chan_str[256];
int znum;
if (sscanf(line, "%s %s %s", num_str, name_str, chan_str) != 3)
return 0;
znum = strtoul(num_str, 0, 10);
if (znum < 1 || znum > NZONES) {
fprintf(stderr, "Bad zone number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Zones table.
erase_zones();
}
setup_zone(znum-1, name_str);
if (*chan_str != '-') {
char *str = chan_str;
int nchan = 0;
int range = 0;
int last = 0;
// Parse channel list.
for (;;) {
char *eptr;
int cnum = strtoul(str, &eptr, 10);
if (eptr == str) {
fprintf(stderr, "Zone %d: wrong channel list '%s'.\n", znum, str);
return 0;
}
if (cnum < 1 || cnum > NCHAN) {
fprintf(stderr, "Zone %d: wrong channel number %d.\n", znum, cnum);
return 0;
}
if (range) {
// Add range.
int c;
for (c=last+1; c<=cnum; c++) {
if (!zone_append(znum-1, c)) {
fprintf(stderr, "Zone %d: too many channels.\n", znum);
return 0;
}
nchan++;
}
} else {
// Add single channel.
if (!zone_append(znum-1, cnum)) {
fprintf(stderr, "Zone %d: too many channels.\n", znum);
return 0;
}
nchan++;
}
if (*eptr == 0)
break;
if (*eptr != ',' && *eptr != '-') {
fprintf(stderr, "Zone %d: wrong channel list '%s'.\n", znum, eptr);
return 0;
}
range = (*eptr == '-');
last = cnum;
str = eptr + 1;
}
}
return 1;
}
//
// Parse one line of Scanlist table.
// Return 0 on failure.
//
static int parse_scanlist(int first_row, char *line)
{
char num_str[256], name_str[256], prio1_str[256], prio2_str[256];
char tx_str[256], chan_str[256];
int snum, prio1, prio2, txchan;
if (sscanf(line, "%s %s %s %s %s %s",
num_str, name_str, prio1_str, prio2_str, tx_str, chan_str) != 6)
return 0;
snum = atoi(num_str);
if (snum < 1 || snum > NSCANL) {
fprintf(stderr, "Bad scan list number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Scanlists table.
erase_scanlists();
}
if (*prio1_str == '-') {
prio1 = 0;
} else if (strcasecmp("Sel", prio1_str) == 0) {
prio1 = 1;
} else {
prio1 = atoi(prio1_str);
if (prio1 < 1 || prio1 > NCHAN) {
fprintf(stderr, "Bad priority channel 1.\n");
return 0;
}
prio1++;
}
if (*prio2_str == '-') {
prio2 = 0;
} else if (strcasecmp("Sel", prio2_str) == 0) {
prio2 = 1;
} else {
prio2 = atoi(prio2_str);
if (prio2 < 1 || prio2 > NCHAN) {
fprintf(stderr, "Bad priority channel 2.\n");
return 0;
}
prio2++;
}
if (strcasecmp("Last", tx_str) == 0) {
txchan = 0;
} else if (strcasecmp("Sel", tx_str) == 0) {
txchan = 1;
} else {
txchan = atoi(tx_str);
if (txchan < 1 || txchan > NCHAN) {
fprintf(stderr, "Bad transmit channel.\n");
return 0;
}
txchan++;
}
setup_scanlist(snum-1, name_str, prio1, prio2, txchan);
if (*chan_str == '-') {
// Empty.
} else if (strcasecmp("Sel", chan_str) == 0) {
// Selected channel only.
scanlist_append(snum-1, 0);
} else {
char *str = chan_str;
int nchan = 0;
int range = 0;
int last = 0;
// Parse channel list.
for (;;) {
char *eptr;
int cnum = strtoul(str, &eptr, 10);
if (eptr == str) {
fprintf(stderr, "Scan list %d: wrong channel list '%s'.\n", snum, str);
return 0;
}
if (cnum < 1 || cnum > NCHAN) {
fprintf(stderr, "Scan list %d: wrong channel number %d.\n", snum, cnum);
return 0;
}
if (range) {
// Add range.
int c;
for (c=last+1; c<=cnum; c++) {
if (!scanlist_append(snum-1, c)) {
fprintf(stderr, "Scan list %d: too many channels.\n", snum);
return 0;
}
nchan++;
}
} else {
// Add single channel.
if (!scanlist_append(snum-1, cnum)) {
fprintf(stderr, "Scan list %d: too many channels.\n", snum);
return 0;
}
nchan++;
}
if (*eptr == 0)
break;
if (*eptr != ',' && *eptr != '-') {
fprintf(stderr, "Scan list %d: wrong channel list '%s'.\n", snum, eptr);
return 0;
}
range = (*eptr == '-');
last = cnum;
str = eptr + 1;
}
}
return 1;
}
//
// Parse one line of Contacts table.
// Return 0 on failure.
//
static int parse_contact(int first_row, char *line)
{
char num_str[256], name_str[256], type_str[256], id_str[256], rxtone_str[256];
int cnum, type, id, rxtone;
if (sscanf(line, "%s %s %s %s %s",
num_str, name_str, type_str, id_str, rxtone_str) != 5)
return 0;
cnum = atoi(num_str);
if (cnum < 1 || cnum > NCONTACTS) {
fprintf(stderr, "Bad contact number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Contacts table.
erase_contacts();
}
if (strcasecmp("Group", type_str) == 0) {
type = CALL_GROUP;
} else if (strcasecmp("Private", type_str) == 0) {
type = CALL_PRIVATE;
} else if (strcasecmp("All", type_str) == 0) {
type = CALL_ALL;
} else {
fprintf(stderr, "Bad call type.\n");
return 0;
}
id = atoi(id_str);
if (id < 1 || id > 0xffffff) {
fprintf(stderr, "Bad call ID.\n");
return 0;
}
if (*rxtone_str == '-' || strcasecmp("No", rxtone_str) == 0) {
rxtone = 0;
} else if (*rxtone_str == '+' || strcasecmp("Yes", rxtone_str) == 0) {
rxtone = 1;
} else {
fprintf(stderr, "Bad receive tone flag.\n");
return 0;
}
setup_contact(cnum-1, name_str, type, id, rxtone);
return 1;
}
//
// Parse one line of Grouplist table.
// Return 0 on failure.
//
static int parse_grouplist(int first_row, char *line)
{
char num_str[256], name_str[256], list_str[256];
int glnum;
if (sscanf(line, "%s %s %s", num_str, name_str, list_str) != 3)
return 0;
glnum = strtoul(num_str, 0, 10);
if (glnum < 1 || glnum > NGLISTS) {
fprintf(stderr, "Bad group list number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Grouplists table.
memset(&radio_mem[OFFSET_GROUPTAB], 0, sizeof(grouptab_t));
}
setup_grouplist(glnum-1, name_str);
if (*list_str != '-') {
char *str = list_str;
int range = 0;
int last = 0;
// Parse contact list.
for (;;) {
char *eptr;
int cnum = strtoul(str, &eptr, 10);
if (eptr == str) {
fprintf(stderr, "Group list %d: wrong contact list '%s'.\n", glnum, str);
return 0;
}
if (cnum < 1 || cnum > NCONTACTS) {
fprintf(stderr, "Group list %d: wrong contact number %d.\n", glnum, cnum);
return 0;
}
if (range) {
// Add range.
int c;
for (c=last+1; c<=cnum; c++) {
if (!grouplist_append(glnum-1, c)) {
fprintf(stderr, "Group list %d: too many contacts.\n", glnum);
return 0;
}
}
} else {
// Add single contact.
if (!grouplist_append(glnum-1, cnum)) {
fprintf(stderr, "Group list %d: too many contacts.\n", glnum);
return 0;
}
}
if (*eptr == 0)
break;
if (*eptr != ',' && *eptr != '-') {
fprintf(stderr, "Group list %d: wrong contact list '%s'.\n", glnum, eptr);
return 0;
}
range = (*eptr == '-');
last = cnum;
str = eptr + 1;
}
}
return 1;
}
//
// Parse one line of Messages table.
// Return 0 on failure.
//
static int parse_messages(int first_row, char *line)
{
char *text;
int mnum;
mnum = strtoul(line, &text, 10);
if (text == line || mnum < 1 || mnum > NMESSAGES) {
fprintf(stderr, "Bad message number.\n");
return 0;
}
if (first_row) {
// On first entry, erase the Messages table.
memset(GET_MSGTAB(), 0, sizeof(msgtab_t));
}
setup_message(mnum-1, text);
return 1;
}
//
// Parse table header.
// Return table id, or 0 in case of error.
//
static int rd5r_parse_header(radio_device_t *radio, char *line)
{
if (strncasecmp(line, "Digital", 7) == 0)
return 'D';
if (strncasecmp(line, "Analog", 6) == 0)
return 'A';
if (strncasecmp(line, "Zone", 4) == 0)
return 'Z';
if (strncasecmp(line, "Scanlist", 8) == 0)
return 'S';
if (strncasecmp(line, "Contact", 7) == 0)
return 'C';
if (strncasecmp(line, "Grouplist", 9) == 0)
return 'G';
if (strncasecmp(line, "Message", 7) == 0)
return 'M';
return 0;
}
//
// Parse one line of table data.
// Return 0 on failure.
//
static int rd5r_parse_row(radio_device_t *radio, int table_id, int first_row, char *line)
{
switch (table_id) {
case 'D': return parse_digital_channel(radio, first_row, line);
case 'A': return parse_analog_channel(radio, first_row, line);
case 'Z': return parse_zones(first_row, line);
case 'S': return parse_scanlist(first_row, line);
case 'C': return parse_contact(first_row, line);
case 'G': return parse_grouplist(first_row, line);
case 'M': return parse_messages(first_row, line);
}
return 0;
}
//
// Update timestamp.
//
static void rd5r_update_timestamp(radio_device_t *radio)
{
unsigned char *timestamp = GET_TIMESTAMP();
char p[16];
// Last Programmed Date
get_timestamp(p);
timestamp[0] = ((p[0] & 0xf) << 4) | (p[1] & 0xf); // year upper
timestamp[1] = ((p[2] & 0xf) << 4) | (p[3] & 0xf); // year lower
timestamp[2] = ((p[4] & 0xf) << 4) | (p[5] & 0xf); // month
timestamp[3] = ((p[6] & 0xf) << 4) | (p[7] & 0xf); // day
timestamp[4] = ((p[8] & 0xf) << 4) | (p[9] & 0xf); // hour
timestamp[5] = ((p[10] & 0xf) << 4) | (p[11] & 0xf); // minute
}
//
// Check that configuration is correct.
// Return 0 on error.
//
static int rd5r_verify_config(radio_device_t *radio)
{
int i, k, nchannels = 0, nzones = 0, nscanlists = 0, ngrouplists = 0;
int ncontacts = 0, nerrors = 0;
// Channels: check references to scanlists, contacts and grouplists.
for (i=0; i<NCHAN; i++) {
channel_t *ch = get_channel(i);
if (!ch)
continue;
nchannels++;
if (ch->scan_list_index != 0) {
scanlist_t *sl = get_scanlist(ch->scan_list_index - 1);
if (!sl) {
fprintf(stderr, "Channel %d '", i+1);
print_ascii(stderr, ch->name, 16, 0);
fprintf(stderr, "': scanlist %d not found.\n", ch->scan_list_index);
nerrors++;
}
}
if (ch->contact_name_index != 0) {
contact_t *ct = GET_CONTACT(ch->contact_name_index - 1);
if (!VALID_CONTACT(ct)) {
fprintf(stderr, "Channel %d '", i+1);
print_ascii(stderr, ch->name, 16, 0);
fprintf(stderr, "': contact %d not found.\n", ch->contact_name_index);
nerrors++;
}
}
if (ch->group_list_index != 0) {
grouplist_t *gl = get_grouplist(ch->group_list_index - 1);
if (!gl) {
fprintf(stderr, "Channel %d '", i+1);
print_ascii(stderr, ch->name, 16, 0);
fprintf(stderr, "': grouplist %d not found.\n", ch->group_list_index);
nerrors++;
}
}
}
// Zones: check references to channels.
for (i=0; i<NZONES; i++) {
zone_t *z = get_zone(i);
if (!z)
continue;
nzones++;
for (k=0; k<16; k++) {
int cnum = z->member[k];
if (cnum != 0 && !get_channel(cnum - 1)) {
fprintf(stderr, "Zone %d '", i+1);
print_ascii(stderr, z->name, 16, 0);
fprintf(stderr, "': channel %d not found.\n", cnum);
nerrors++;
}
}
}
// Scanlists: check references to channels.
for (i=0; i<NSCANL; i++) {
scanlist_t *sl = get_scanlist(i);
if (!sl)
continue;
nscanlists++;
for (k=0; k<32; k++) {
int cnum = sl->member[k] - 1;
if (cnum > 0 && !get_channel(cnum - 1)) {
fprintf(stderr, "Scanlist %d '", i+1);
print_ascii(stderr, sl->name, 15, 0);
fprintf(stderr, "': channel %d not found.\n", cnum);
nerrors++;
}
}
}
// Grouplists: check references to contacts.
for (i=0; i<NGLISTS; i++) {
grouplist_t *gl = get_grouplist(i);
if (!gl)
continue;
ngrouplists++;
for (k=0; k<16; k++) {
int cnum = gl->member[k];
if (cnum != 0) {
contact_t *ct = GET_CONTACT(cnum - 1);
if (!VALID_CONTACT(ct)) {
fprintf(stderr, "Grouplist %d '", i+1);
print_ascii(stderr, gl->name, 16, 0);
fprintf(stderr, "': contact %d not found.\n", cnum);
nerrors++;
}
}
}
}
// Count contacts.
for (i=0; i<NCONTACTS; i++) {
contact_t *ct = GET_CONTACT(i);
if (!VALID_CONTACT(ct))
continue;
ncontacts++;
}
if (nerrors > 0) {
fprintf(stderr, "Total %d errors.\n", nerrors);
return 0;
}
fprintf(stderr, "Total %d channels, %d zones, %d scanlists, %d contacts, %d grouplists.\n",
nchannels, nzones, nscanlists, ncontacts, ngrouplists);
return 1;
}
//
// Baofeng RD-5R
//
radio_device_t radio_rd5r = {
"Baofeng RD-5R",
rd5r_download,
rd5r_upload,
rd5r_is_compatible,
rd5r_read_image,
rd5r_save_image,
rd5r_print_version,
rd5r_print_config,
rd5r_verify_config,
rd5r_parse_parameter,
rd5r_parse_header,
rd5r_parse_row,
rd5r_update_timestamp,
};