Parse analog channels.
This commit is contained in:
Serge Vakulenko
parent
23e87ef4da
commit
f08a3fdb3c
191
md380.c
191
md380.c
@ -147,8 +147,8 @@ typedef struct {
|
||||
uint32_t tx_frequency; // TX Frequency: 8 digits BCD
|
||||
|
||||
// Bytes 24-27
|
||||
uint16_t ctcss_dcs_decode; // CTCSS/DCS Dec: 4 digits BCD
|
||||
uint16_t ctcss_dcs_encode; // CTCSS/DCS Enc: 4 digits BCD
|
||||
uint16_t ctcss_dcs_receive; // CTCSS/DCS Dec: 4 digits BCD
|
||||
uint16_t ctcss_dcs_transmit; // CTCSS/DCS Enc: 4 digits BCD
|
||||
|
||||
// Bytes 28-29
|
||||
uint8_t rx_signaling_syst; // Rx Signaling System: Off, DTMF-1...4
|
||||
@ -229,7 +229,7 @@ typedef struct {
|
||||
|
||||
//
|
||||
// General settings.
|
||||
// TODO: verify the general settings with CPS
|
||||
// TODO: verify the general settings with official CPS
|
||||
//
|
||||
typedef struct {
|
||||
|
||||
@ -400,6 +400,13 @@ static void setup_zone(int zone_index, int chan_index)
|
||||
*data |= 1 << (chan_index & 7);
|
||||
}
|
||||
|
||||
static void erase_zone(int zone_index)
|
||||
{
|
||||
uint8_t *data = &radio_mem[OFFSET_ZONES + zone_index*0x80];
|
||||
|
||||
memset(data, 0, 0x80);
|
||||
}
|
||||
|
||||
//
|
||||
// Print frequency (BCD value).
|
||||
//
|
||||
@ -438,7 +445,8 @@ static int is_valid_frequency(int mhz)
|
||||
//
|
||||
static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_mhz,
|
||||
int power, int scanlist, int autoscan, int squelch, int tot, int rxonly,
|
||||
int admit, int colorcode, int timeslot, int incall, int grouplist, int contact)
|
||||
int admit, int colorcode, int timeslot, int incall, int grouplist, int contact,
|
||||
int rxtone, int txtone, int width)
|
||||
{
|
||||
//TODO: always set Data Call Confirmed=1 (wait for SMS acknowledge)
|
||||
//TODO: always set talkaround=0
|
||||
@ -485,6 +493,14 @@ static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_
|
||||
#endif
|
||||
}
|
||||
|
||||
//
|
||||
// Erase the channel record.
|
||||
//
|
||||
static void erase_channel(int i)
|
||||
{
|
||||
//TODO: erase channel
|
||||
}
|
||||
|
||||
//
|
||||
// Convert a 4-byte frequency value from binary coded decimal
|
||||
// to integer format (in Hertz).
|
||||
@ -873,9 +889,9 @@ static void print_analog_channels(FILE *out, int verbose)
|
||||
// CTCSS/DCS Dec
|
||||
// CTCSS/DCS Enc
|
||||
// Bandwidth
|
||||
print_tone(out, ch->ctcss_dcs_decode);
|
||||
print_tone(out, ch->ctcss_dcs_receive);
|
||||
fprintf(out, " ");
|
||||
print_tone(out, ch->ctcss_dcs_encode);
|
||||
print_tone(out, ch->ctcss_dcs_transmit);
|
||||
fprintf(out, " %s", BANDWIDTH[ch->bandwidth]);
|
||||
|
||||
#ifdef PRINT_RARE_PARAMS
|
||||
@ -1182,6 +1198,22 @@ static void md380_save_image(radio_device_t *radio, FILE *img)
|
||||
fwrite(&radio_mem[0], 1, MEMSZ, img);
|
||||
}
|
||||
|
||||
//
|
||||
// Erase all channels, zones and scanlists.
|
||||
//
|
||||
static void erase_channels()
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
erase_channel(i);
|
||||
}
|
||||
for (i=0; i<NZONES; i++) {
|
||||
erase_zone(i);
|
||||
}
|
||||
//TODO: erase scanlists
|
||||
}
|
||||
|
||||
//
|
||||
// Parse the scalar parameter.
|
||||
//
|
||||
@ -1372,17 +1404,13 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
}
|
||||
|
||||
if (first_row && radio->channel_count == 0) {
|
||||
// On first entry, erase the channel table.
|
||||
int i;
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
setup_channel(i, MODE_ANALOG, 0, 0, 0, POWER_HIGH, 0, 0, 0,
|
||||
4, 0, 0, 1, 1, 0, 0, 0);
|
||||
}
|
||||
// On first entry, erase all channels, zones and scanlists.
|
||||
erase_channels();
|
||||
}
|
||||
|
||||
setup_channel(num-1, MODE_DIGITAL, name_str, rx_mhz, tx_mhz,
|
||||
power, scanlist, autoscan, squelch, tot, rxonly, admit,
|
||||
colorcode, timeslot, incall, grouplist, contact);
|
||||
colorcode, timeslot, incall, grouplist, contact, 0, 0, 0);
|
||||
|
||||
radio->channel_count++;
|
||||
return 1;
|
||||
@ -1395,30 +1423,19 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
//
|
||||
static int parse_analog_channel(radio_device_t *radio, int first_row, char *line)
|
||||
{
|
||||
#if 1
|
||||
//TODO: parse analog channel Name
|
||||
//TODO: parse analog channel Receive
|
||||
//TODO: parse analog channel Transmit
|
||||
//TODO: parse analog channel Power
|
||||
//TODO: parse analog channel Scan
|
||||
//TODO: parse analog channel AS
|
||||
//TODO: parse analog channel Sq
|
||||
//TODO: parse analog channel TOT
|
||||
//TODO: parse analog channel RO
|
||||
//TODO: parse analog channel Admit
|
||||
//TODO: parse analog channel RxTone
|
||||
//TODO: parse analog channel TxTone
|
||||
//TODO: parse analog channel Width
|
||||
return 0;
|
||||
#else
|
||||
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
|
||||
char power_str[256], wide_str[256], scan_str[256];
|
||||
int num, tmode, power, wide, scan, isam;
|
||||
char power_str[256], scanlist_str[256], autoscan_str[256], squelch_str[256];
|
||||
char tot_str[256], rxonly_str[256], admit_str[256];
|
||||
char rxtone_str[256], txtone_str[256], width_str[256];
|
||||
int num, power, scanlist, autoscan, squelch, tot, rxonly, admit;
|
||||
int rxtone, txtone, width;
|
||||
double rx_mhz, tx_mhz;
|
||||
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s",
|
||||
num_str, name_str, rxfreq_str, offset_str, power_str,
|
||||
wide_str, scan_str) != 9)
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s %s",
|
||||
num_str, name_str, rxfreq_str, offset_str,
|
||||
power_str, scanlist_str, autoscan_str, squelch_str,
|
||||
tot_str, rxonly_str, admit_str,
|
||||
rxtone_str, txtone_str, width_str) != 14)
|
||||
return 0;
|
||||
|
||||
num = atoi(num_str);
|
||||
@ -1428,7 +1445,7 @@ static int parse_analog_channel(radio_device_t *radio, int first_row, char *line
|
||||
}
|
||||
|
||||
if (sscanf(rxfreq_str, "%lf", &rx_mhz) != 1 ||
|
||||
! is_valid_frequency(rx_mhz)) {
|
||||
!is_valid_frequency(rx_mhz)) {
|
||||
fprintf(stderr, "Bad receive frequency.\n");
|
||||
return 0;
|
||||
}
|
||||
@ -1441,58 +1458,100 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
if (! is_valid_frequency(tx_mhz))
|
||||
goto badtx;
|
||||
|
||||
//TODO
|
||||
tmode = 0;
|
||||
|
||||
if (strcasecmp("High", power_str) == 0) {
|
||||
power = 0;
|
||||
} else if (strcasecmp("Mid", power_str) == 0) {
|
||||
power = 1;
|
||||
power = POWER_HIGH;
|
||||
} else if (strcasecmp("Low", power_str) == 0) {
|
||||
power = 2;
|
||||
power = POWER_LOW;
|
||||
} else {
|
||||
fprintf(stderr, "Bad power level.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (strcasecmp("Wide", wide_str) == 0) {
|
||||
wide = 1;
|
||||
isam = 0;
|
||||
} else if(strcasecmp("Narrow", wide_str) == 0) {
|
||||
wide = 0;
|
||||
isam = 0;
|
||||
} else if(strcasecmp("AM", wide_str) == 0) {
|
||||
wide = 1;
|
||||
isam = 1;
|
||||
if (*scanlist_str == '-') {
|
||||
scanlist = 0;
|
||||
} else {
|
||||
fprintf(stderr, "Bad modulation width.\n");
|
||||
scanlist = atoi(scanlist_str);
|
||||
if (scanlist == 0 || scanlist > NSCANL) {
|
||||
fprintf(stderr, "Bad scanlist.\n");
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
if (*autoscan_str == '-') {
|
||||
autoscan = 0;
|
||||
} else if (*autoscan_str == '+') {
|
||||
autoscan = 1;
|
||||
} else {
|
||||
fprintf(stderr, "Bad autoscan flag.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (*scan_str == '+') {
|
||||
scan = 0;
|
||||
} else if (*scan_str == '-') {
|
||||
scan = 1;
|
||||
} else if (strcasecmp("Only", scan_str) == 0) {
|
||||
scan = 2;
|
||||
squelch = atoi(squelch_str);
|
||||
if (squelch > 9) {
|
||||
fprintf(stderr, "Bad squelch level.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
tot = atoi(tot_str);
|
||||
if (tot > 37) {
|
||||
fprintf(stderr, "Bad timeout timer.\n");
|
||||
return 0;
|
||||
}
|
||||
tot *= 15;
|
||||
|
||||
if (*rxonly_str == '-') {
|
||||
rxonly = 0;
|
||||
} else if (*rxonly_str == '+') {
|
||||
rxonly = 1;
|
||||
} else {
|
||||
fprintf(stderr, "Bad scan flag.\n");
|
||||
fprintf(stderr, "Bad receive only flag.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (*admit_str == '-' || strcasecmp("Always", admit_str) == 0) {
|
||||
admit = ADMIT_ALWAYS;
|
||||
} else if (strcasecmp("Free", admit_str) == 0) {
|
||||
admit = ADMIT_CH_FREE;
|
||||
} else if (strcasecmp("Tone", admit_str) == 0) {
|
||||
admit = ADMIT_TONE;
|
||||
} else {
|
||||
fprintf(stderr, "Bad admit criteria.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
rxtone = encode_tone(rxtone_str);
|
||||
if (rxtone < 0) {
|
||||
fprintf(stderr, "Bad receive tone.\n");
|
||||
return 0;
|
||||
}
|
||||
txtone = encode_tone(txtone_str);
|
||||
if (txtone < 0) {
|
||||
fprintf(stderr, "Bad transmit tone.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (strcasecmp ("12.5", width_str) == 0) {
|
||||
width = BW_12_5_KHZ;
|
||||
} else if (strcasecmp ("20", width_str) == 0) {
|
||||
width = BW_20_KHZ;
|
||||
} else if (strcasecmp ("25", width_str) == 0) {
|
||||
width = BW_25_KHZ;
|
||||
} else {
|
||||
fprintf (stderr, "Bad width.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (first_row && radio->channel_count == 0) {
|
||||
// On first entry, erase the channel table.
|
||||
int i;
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
setup_channel(i, MODE_ANALOG, 0, 0, 0, 0, 12, 1, 0, 0);
|
||||
}
|
||||
// On first entry, erase all channels, zones and scanlists.
|
||||
erase_channels();
|
||||
}
|
||||
|
||||
setup_channel(num-1, MODE_ANALOG, name_str, rx_mhz, tx_mhz,
|
||||
tmode, power, wide, scan, isam);
|
||||
power, scanlist, autoscan, squelch, tot, rxonly, admit,
|
||||
1, 1, 0, 0, 0, rxtone, txtone, width);
|
||||
|
||||
radio->channel_count++;
|
||||
return 1;
|
||||
#endif
|
||||
}
|
||||
|
||||
//
|
||||
|
||||
106
util.c
106
util.c
@ -38,6 +38,38 @@
|
||||
#endif
|
||||
#include "util.h"
|
||||
|
||||
//
|
||||
// CTCSS tones, Hz*10.
|
||||
//
|
||||
#define NCTCSS 50
|
||||
|
||||
const int CTCSS_TONES [NCTCSS] = {
|
||||
670, 693, 719, 744, 770, 797, 825, 854, 885, 915,
|
||||
948, 974, 1000, 1035, 1072, 1109, 1148, 1188, 1230, 1273,
|
||||
1318, 1365, 1413, 1462, 1514, 1567, 1598, 1622, 1655, 1679,
|
||||
1713, 1738, 1773, 1799, 1835, 1862, 1899, 1928, 1966, 1995,
|
||||
2035, 2065, 2107, 2181, 2257, 2291, 2336, 2418, 2503, 2541,
|
||||
};
|
||||
|
||||
//
|
||||
// DCS codes.
|
||||
//
|
||||
#define NDCS 104
|
||||
|
||||
static const int DCS_CODES[NDCS] = {
|
||||
23, 25, 26, 31, 32, 36, 43, 47, 51, 53,
|
||||
54, 65, 71, 72, 73, 74, 114, 115, 116, 122,
|
||||
125, 131, 132, 134, 143, 145, 152, 155, 156, 162,
|
||||
165, 172, 174, 205, 212, 223, 225, 226, 243, 244,
|
||||
245, 246, 251, 252, 255, 261, 263, 265, 266, 271,
|
||||
274, 306, 311, 315, 325, 331, 332, 343, 346, 351,
|
||||
356, 364, 365, 371, 411, 412, 413, 423, 431, 432,
|
||||
445, 446, 452, 454, 455, 462, 464, 465, 466, 503,
|
||||
506, 516, 523, 526, 532, 546, 565, 606, 612, 624,
|
||||
627, 631, 632, 654, 662, 664, 703, 712, 723, 731,
|
||||
732, 734, 743, 754,
|
||||
};
|
||||
|
||||
//
|
||||
// Check for a regular file.
|
||||
//
|
||||
@ -290,3 +322,77 @@ void utf8_decode(unsigned short *dst, const char *src, unsigned nsym)
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
//
|
||||
// Convert tone string to BCD format.
|
||||
// Four possible formats:
|
||||
// nnn.n - CTCSS frequency
|
||||
// DnnnN - DCS normal
|
||||
// DnnnI - DCS inverted
|
||||
// '-' - Disabled
|
||||
//
|
||||
int encode_tone(char *str)
|
||||
{
|
||||
unsigned val, tag, a, b, c, d;
|
||||
|
||||
if (*str == '-') {
|
||||
// Disabled
|
||||
return 0;
|
||||
|
||||
} else if (*str == 'D' || *str == 'd') {
|
||||
//
|
||||
// DCS tone
|
||||
//
|
||||
char *e;
|
||||
val = strtoul(++str, &e, 10);
|
||||
|
||||
// Find a valid index in DCS table.
|
||||
int i;
|
||||
for (i=0; i<NDCS; i++)
|
||||
if (DCS_CODES[i] == val)
|
||||
break;
|
||||
if (i >= NDCS)
|
||||
return -1;
|
||||
|
||||
a = 0;
|
||||
b = val / 100;
|
||||
c = val / 10 % 10;
|
||||
d = val % 10;
|
||||
|
||||
if (*e == 'N' || *e == 'n') {
|
||||
tag = 2;
|
||||
} else if (*e == 'I' || *e == 'i') {
|
||||
tag = 3;
|
||||
} else {
|
||||
return -1;
|
||||
}
|
||||
} else if (*str >= '0' && *str <= '9') {
|
||||
//
|
||||
// CTCSS tone
|
||||
//
|
||||
float hz;
|
||||
if (sscanf(str, "%f", &hz) != 1)
|
||||
return -1;
|
||||
|
||||
// Round to integer.
|
||||
val = hz * 10.0 + 0.5;
|
||||
|
||||
// Find a valid index in CTCSS table.
|
||||
int i;
|
||||
for (i=0; i<NCTCSS; i++)
|
||||
if (CTCSS_TONES[i] == val)
|
||||
break;
|
||||
if (i >= NCTCSS)
|
||||
return -1;
|
||||
|
||||
a = val / 1000;
|
||||
b = val / 100 % 10;
|
||||
c = val / 10 % 10;
|
||||
d = val % 10;
|
||||
tag = 0;
|
||||
} else {
|
||||
return -1;
|
||||
}
|
||||
|
||||
return (a << 12) | (b << 8) | (c << 4) | d | (tag << 14);
|
||||
}
|
||||
|
||||
11
util.h
11
util.h
@ -145,3 +145,14 @@ void utf8_decode(unsigned short *dst, const char *src, unsigned nsym);
|
||||
// Get local time in format: YYYYMMDDhhmmss
|
||||
//
|
||||
void get_timestamp(char p[16]);
|
||||
|
||||
//
|
||||
// Convert tone string to BCD format.
|
||||
// Return -1 on error.
|
||||
// Four possible formats:
|
||||
// nnn.n - CTCSS frequency
|
||||
// DnnnN - DCS normal
|
||||
// DnnnI - DCS inverted
|
||||
// '-' - Disabled
|
||||
//
|
||||
int encode_tone(char *str);
|
||||
|
||||
191
uv380.c
191
uv380.c
@ -144,8 +144,8 @@ typedef struct {
|
||||
uint32_t tx_frequency; // TX Frequency: 8 digits BCD
|
||||
|
||||
// Bytes 24-27
|
||||
uint16_t ctcss_dcs_decode; // CTCSS/DCS Dec: 4 digits BCD
|
||||
uint16_t ctcss_dcs_encode; // CTCSS/DCS Enc: 4 digits BCD
|
||||
uint16_t ctcss_dcs_receive; // CTCSS/DCS Dec: 4 digits BCD
|
||||
uint16_t ctcss_dcs_transmit; // CTCSS/DCS Enc: 4 digits BCD
|
||||
|
||||
// Bytes 28-29
|
||||
uint8_t rx_signaling_syst; // Rx Signaling System: Off, DTMF-1...4
|
||||
@ -247,7 +247,7 @@ typedef struct {
|
||||
|
||||
//
|
||||
// General settings.
|
||||
// TODO: verify the general settings with CPS
|
||||
// TODO: verify the general settings with official CPS
|
||||
//
|
||||
typedef struct {
|
||||
|
||||
@ -416,6 +416,13 @@ static void setup_zone(int zone_index, int chan_index)
|
||||
*data |= 1 << (chan_index & 7);
|
||||
}
|
||||
|
||||
static void erase_zone(int zone_index)
|
||||
{
|
||||
uint8_t *data = &radio_mem[OFFSET_ZONES + zone_index*0x80];
|
||||
|
||||
memset(data, 0, 0x80);
|
||||
}
|
||||
|
||||
//
|
||||
// Print frequency (BCD value).
|
||||
//
|
||||
@ -454,7 +461,8 @@ static int is_valid_frequency(int mhz)
|
||||
//
|
||||
static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_mhz,
|
||||
int power, int scanlist, int autoscan, int squelch, int tot, int rxonly,
|
||||
int admit, int colorcode, int timeslot, int incall, int grouplist, int contact)
|
||||
int admit, int colorcode, int timeslot, int incall, int grouplist, int contact,
|
||||
int rxtone, int txtone, int width)
|
||||
{
|
||||
//TODO: always set Data Call Confirmed=1 (wait for SMS acknowledge)
|
||||
//TODO: always set talkaround=0
|
||||
@ -501,6 +509,14 @@ static void setup_channel(int i, int mode, char *name, double rx_mhz, double tx_
|
||||
#endif
|
||||
}
|
||||
|
||||
//
|
||||
// Erase the channel record.
|
||||
//
|
||||
static void erase_channel(int i)
|
||||
{
|
||||
//TODO: erase channel
|
||||
}
|
||||
|
||||
//
|
||||
// Convert a 4-byte frequency value from binary coded decimal
|
||||
// to integer format (in Hertz).
|
||||
@ -895,9 +911,9 @@ static void print_analog_channels(FILE *out, int verbose)
|
||||
// CTCSS/DCS Dec
|
||||
// CTCSS/DCS Enc
|
||||
// Bandwidth
|
||||
print_tone(out, ch->ctcss_dcs_decode);
|
||||
print_tone(out, ch->ctcss_dcs_receive);
|
||||
fprintf(out, " ");
|
||||
print_tone(out, ch->ctcss_dcs_encode);
|
||||
print_tone(out, ch->ctcss_dcs_transmit);
|
||||
fprintf(out, " %s", BANDWIDTH[ch->bandwidth]);
|
||||
|
||||
#ifdef PRINT_RARE_PARAMS
|
||||
@ -1223,6 +1239,22 @@ static void uv380_save_image(radio_device_t *radio, FILE *img)
|
||||
fwrite(&radio_mem[0], 1, MEMSZ, img);
|
||||
}
|
||||
|
||||
//
|
||||
// Erase all channels, zones and scanlists.
|
||||
//
|
||||
static void erase_channels()
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
erase_channel(i);
|
||||
}
|
||||
for (i=0; i<NZONES; i++) {
|
||||
erase_zone(i);
|
||||
}
|
||||
//TODO: erase scanlists
|
||||
}
|
||||
|
||||
//
|
||||
// Parse the scalar parameter.
|
||||
//
|
||||
@ -1419,17 +1451,13 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
}
|
||||
|
||||
if (first_row && radio->channel_count == 0) {
|
||||
// On first entry, erase the channel table.
|
||||
int i;
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
setup_channel(i, MODE_ANALOG, 0, 0, 0, POWER_HIGH, 0, 0, 0,
|
||||
4, 0, 0, 1, 1, 0, 0, 0);
|
||||
}
|
||||
// On first entry, erase all channels, zones and scanlists.
|
||||
erase_channels();
|
||||
}
|
||||
|
||||
setup_channel(num-1, MODE_DIGITAL, name_str, rx_mhz, tx_mhz,
|
||||
power, scanlist, autoscan, squelch, tot, rxonly, admit,
|
||||
colorcode, timeslot, incall, grouplist, contact);
|
||||
colorcode, timeslot, incall, grouplist, contact, 0, 0, 0);
|
||||
|
||||
radio->channel_count++;
|
||||
return 1;
|
||||
@ -1442,30 +1470,19 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
//
|
||||
static int parse_analog_channel(radio_device_t *radio, int first_row, char *line)
|
||||
{
|
||||
#if 1
|
||||
//TODO: parse analog channel Name
|
||||
//TODO: parse analog channel Receive
|
||||
//TODO: parse analog channel Transmit
|
||||
//TODO: parse analog channel Power
|
||||
//TODO: parse analog channel Scan
|
||||
//TODO: parse analog channel AS
|
||||
//TODO: parse analog channel Sq
|
||||
//TODO: parse analog channel TOT
|
||||
//TODO: parse analog channel RO
|
||||
//TODO: parse analog channel Admit
|
||||
//TODO: parse analog channel RxTone
|
||||
//TODO: parse analog channel TxTone
|
||||
//TODO: parse analog channel Width
|
||||
return 0;
|
||||
#else
|
||||
char num_str[256], name_str[256], rxfreq_str[256], offset_str[256];
|
||||
char power_str[256], wide_str[256], scan_str[256];
|
||||
int num, tmode, power, wide, scan, isam;
|
||||
char power_str[256], scanlist_str[256], autoscan_str[256], squelch_str[256];
|
||||
char tot_str[256], rxonly_str[256], admit_str[256];
|
||||
char rxtone_str[256], txtone_str[256], width_str[256];
|
||||
int num, power, scanlist, autoscan, squelch, tot, rxonly, admit;
|
||||
int rxtone, txtone, width;
|
||||
double rx_mhz, tx_mhz;
|
||||
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s",
|
||||
num_str, name_str, rxfreq_str, offset_str, power_str,
|
||||
wide_str, scan_str) != 9)
|
||||
if (sscanf(line, "%s %s %s %s %s %s %s %s %s %s %s %s %s %s",
|
||||
num_str, name_str, rxfreq_str, offset_str,
|
||||
power_str, scanlist_str, autoscan_str, squelch_str,
|
||||
tot_str, rxonly_str, admit_str,
|
||||
rxtone_str, txtone_str, width_str) != 14)
|
||||
return 0;
|
||||
|
||||
num = atoi(num_str);
|
||||
@ -1475,7 +1492,7 @@ static int parse_analog_channel(radio_device_t *radio, int first_row, char *line
|
||||
}
|
||||
|
||||
if (sscanf(rxfreq_str, "%lf", &rx_mhz) != 1 ||
|
||||
! is_valid_frequency(rx_mhz)) {
|
||||
!is_valid_frequency(rx_mhz)) {
|
||||
fprintf(stderr, "Bad receive frequency.\n");
|
||||
return 0;
|
||||
}
|
||||
@ -1488,58 +1505,102 @@ badtx: fprintf(stderr, "Bad transmit frequency.\n");
|
||||
if (! is_valid_frequency(tx_mhz))
|
||||
goto badtx;
|
||||
|
||||
//TODO: parse CTSS/DCS tone
|
||||
tmode = 0;
|
||||
|
||||
if (strcasecmp("High", power_str) == 0) {
|
||||
power = 0;
|
||||
power = POWER_HIGH;
|
||||
} else if (strcasecmp("Mid", power_str) == 0) {
|
||||
power = 1;
|
||||
power = POWER_MIDDLE;
|
||||
} else if (strcasecmp("Low", power_str) == 0) {
|
||||
power = 2;
|
||||
power = POWER_LOW;
|
||||
} else {
|
||||
fprintf(stderr, "Bad power level.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (strcasecmp("Wide", wide_str) == 0) {
|
||||
wide = 1;
|
||||
isam = 0;
|
||||
} else if(strcasecmp("Narrow", wide_str) == 0) {
|
||||
wide = 0;
|
||||
isam = 0;
|
||||
} else if(strcasecmp("AM", wide_str) == 0) {
|
||||
wide = 1;
|
||||
isam = 1;
|
||||
if (*scanlist_str == '-') {
|
||||
scanlist = 0;
|
||||
} else {
|
||||
fprintf(stderr, "Bad modulation width.\n");
|
||||
scanlist = atoi(scanlist_str);
|
||||
if (scanlist == 0 || scanlist > NSCANL) {
|
||||
fprintf(stderr, "Bad scanlist.\n");
|
||||
return 0;
|
||||
}
|
||||
}
|
||||
|
||||
if (*autoscan_str == '-') {
|
||||
autoscan = 0;
|
||||
} else if (*autoscan_str == '+') {
|
||||
autoscan = 1;
|
||||
} else {
|
||||
fprintf(stderr, "Bad autoscan flag.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (*scan_str == '+') {
|
||||
scan = 0;
|
||||
} else if (*scan_str == '-') {
|
||||
scan = 1;
|
||||
} else if (strcasecmp("Only", scan_str) == 0) {
|
||||
scan = 2;
|
||||
squelch = atoi(squelch_str);
|
||||
if (squelch > 9) {
|
||||
fprintf(stderr, "Bad squelch level.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
tot = atoi(tot_str);
|
||||
if (tot > 37) {
|
||||
fprintf(stderr, "Bad timeout timer.\n");
|
||||
return 0;
|
||||
}
|
||||
tot *= 15;
|
||||
|
||||
if (*rxonly_str == '-') {
|
||||
rxonly = 0;
|
||||
} else if (*rxonly_str == '+') {
|
||||
rxonly = 1;
|
||||
} else {
|
||||
fprintf(stderr, "Bad scan flag.\n");
|
||||
fprintf(stderr, "Bad receive only flag.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (*admit_str == '-' || strcasecmp("Always", admit_str) == 0) {
|
||||
admit = ADMIT_ALWAYS;
|
||||
} else if (strcasecmp("Free", admit_str) == 0) {
|
||||
admit = ADMIT_CH_FREE;
|
||||
} else if (strcasecmp("Tone", admit_str) == 0) {
|
||||
admit = ADMIT_TONE;
|
||||
} else {
|
||||
fprintf(stderr, "Bad admit criteria.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
rxtone = encode_tone(rxtone_str);
|
||||
if (rxtone < 0) {
|
||||
fprintf(stderr, "Bad receive tone.\n");
|
||||
return 0;
|
||||
}
|
||||
txtone = encode_tone(txtone_str);
|
||||
if (txtone < 0) {
|
||||
fprintf(stderr, "Bad transmit tone.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (strcasecmp ("12.5", width_str) == 0) {
|
||||
width = BW_12_5_KHZ;
|
||||
} else if (strcasecmp ("20", width_str) == 0) {
|
||||
width = BW_20_KHZ;
|
||||
} else if (strcasecmp ("25", width_str) == 0) {
|
||||
width = BW_25_KHZ;
|
||||
} else {
|
||||
fprintf (stderr, "Bad width.\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
if (first_row && radio->channel_count == 0) {
|
||||
// On first entry, erase the channel table.
|
||||
int i;
|
||||
for (i=0; i<NCHAN; i++) {
|
||||
setup_channel(i, MODE_ANALOG, 0, 0, 0, 0, 12, 1, 0, 0);
|
||||
}
|
||||
// On first entry, erase all channels, zones and scanlists.
|
||||
erase_channels();
|
||||
}
|
||||
|
||||
setup_channel(num-1, MODE_ANALOG, name_str, rx_mhz, tx_mhz,
|
||||
tmode, power, wide, scan, isam);
|
||||
power, scanlist, autoscan, squelch, tot, rxonly, admit,
|
||||
1, 1, 0, 0, 0, rxtone, txtone, width);
|
||||
|
||||
radio->channel_count++;
|
||||
return 1;
|
||||
#endif
|
||||
}
|
||||
|
||||
//
|
||||
|
||||
Loading…
Reference in New Issue
Block a user